FS: Fiberglass hatch frame w/lexan window, $400

jgrewe · 06-12-2008, 07:48 AM

With the fasteners would only be about $15-20 more depending on how many you want and what kind of mounting tabs you want. I've also had people use a combination of dzus, hood pins and stock hinges. I should probably post a shot of that set up. They used the stock hinges and hood pins to hold the straps that SCCA requires as well as holding things down. Then the dzus fasteners were used to hold the "elbo" part on the sides in tight.

It would be best to put the fasteners on after you get the tabs mounted for best fit but shipping you the stuff in a bag would be no big deal.

06-12-2008, 07:48 AM	#9
jgrewe Rotary Fan in Training Join Date: Feb 2008 Location: On the Beach Posts: 59 Rep Power: 18	With the fasteners would only be about $15-20 more depending on how many you want and what kind of mounting tabs you want. I've also had people use a combination of dzus, hood pins and stock hinges. I should probably post a shot of that set up. They used the stock hinges and hood pins to hold the straps that SCCA requires as well as holding things down. Then the dzus fasteners were used to hold the "elbo" part on the sides in tight. It would be best to put the fasteners on after you get the tabs mounted for best fit but shipping you the stuff in a bag would be no big deal. __________________ New rat from the sinking ship.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode