Help!!!!

JL1RX7 · 05-18-2015, 08:57 AM

Kevin Landers (Rotary Resurection) in Morristown Tennessee. He is the home of budget rebuilds. Stand up dude who will work with you on budget. But 2 to 3k would be about were it falls. Almost always the 8 destroys the housings. Finding good used one's is all but impossible.

First and foremost how old are the plugs and coils. If they are over 20k replace them. You can do this yourself and save some money. If you go OEM parts make sure they are the C model. Going O'Riley's/Advanced/Auto Zone will be cheaper and you can get a lifetime warranty on them depending on where you buy them. Plugs are the same way. Only one company makes them so NGK is the same whether OEM or not.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

05-18-2015, 08:57 AM	#11
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA Posts: 487 Rep Power: 18	Kevin Landers (Rotary Resurection) in Morristown Tennessee. He is the home of budget rebuilds. Stand up dude who will work with you on budget. But 2 to 3k would be about were it falls. Almost always the 8 destroys the housings. Finding good used one's is all but impossible. First and foremost how old are the plugs and coils. If they are over 20k replace them. You can do this yourself and save some money. If you go OEM parts make sure they are the C model. Going O'Riley's/Advanced/Auto Zone will be cheaper and you can get a lifetime warranty on them depending on where you buy them. Plugs are the same way. Only one company makes them so NGK is the same whether OEM or not.