compression?? odd readings

Jeff4764 · 09-25-2008, 06:36 PM

ok I can do that and post it tomorrow. But does it sound like i did it right...
I tested both rotors on trailing side. the compression tester fitting screwed into the spark plug hole and i pulled both the inj. fuse and the egi. fuse. I had my girlfriend get in the car and push the pedal to the floor, and cranked it for about 10 seconds while i held the pressure relief valve in and got a steady reading of about 50 psi. I will take video, and if you guys can check it out tomorrow and give me some input that would be awesome.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-25-2008, 06:36 PM	#11
Jeff4764 Rotary Fan in Training Join Date: May 2008 Posts: 40 Rep Power: 0	ok I can do that and post it tomorrow. But does it sound like i did it right... I tested both rotors on trailing side. the compression tester fitting screwed into the spark plug hole and i pulled both the inj. fuse and the egi. fuse. I had my girlfriend get in the car and push the pedal to the floor, and cranked it for about 10 seconds while i held the pressure relief valve in and got a steady reading of about 50 psi. I will take video, and if you guys can check it out tomorrow and give me some input that would be awesome.