GTUs 20B N/A Build Thread

Christopher W. · 01-21-2009, 12:42 PM

My first question,

I bought a clutch and pp from Corksport for my TII transmission before I knew I was going the 20B route.

ACT 'XACT' Streetlite Flywheel
ACT Street Performance Clutch Kit

Does anyone see any problem with using this setup if I am going to be around 375rwhp?

My second question:

I remove the heat shields.

I am going to wrap the entire exhaust for the following reason:

1. To help scavaging
2. To reduce heat
3. I think it will give the exhaust a lower tone.

Is there any problem with not putting the heat shields back on?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-21-2009, 12:42 PM	#7
Christopher W. Rotary Fan in Training Join Date: Mar 2008 Posts: 98 Rep Power: 18	My first question, I bought a clutch and pp from Corksport for my TII transmission before I knew I was going the 20B route. ACT 'XACT' Streetlite Flywheel ACT Street Performance Clutch Kit Does anyone see any problem with using this setup if I am going to be around 375rwhp? My second question: I remove the heat shields. I am going to wrap the entire exhaust for the following reason: 1. To help scavaging 2. To reduce heat 3. I think it will give the exhaust a lower tone. Is there any problem with not putting the heat shields back on?