|
|||||||
| Tires,Wheels,Suspension,Brakes Info about Tires, Wheels, Suspensions, Brakes, etc. |
|
|
Thread Tools | Display Modes |
|
|
#6 |
|
RCC Addict
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
Posts: 1,813
Rep Power: 19 ![]() |
The Tanabe GF210 springs are bigger diameter than stock, so it eats away clearances in the inside (up front).
I don't think any of the listed wheels sizes will fit with a 225 wide tire up front. The 8.5", +27 is your best bet, but you might have to drop down to a 215 wide tires to fit under stock fenders, no rolling. With an 8.0" wide wheel and stock springs (clearances), a +30 is perfect. With the bigger Tanabe GF210's, I wouldn't go more than a +25 on a 8.0". You only mention the 8.5", +27, so that's half inch more width (than the 8.0"), and 2mm pushed in more...way too tight in my book. -Ted |
|
|
|
| Bookmarks |
|
|