|
Show your rotary car build up. Show off your Rotary Car build! |
|
Thread Tools | Display Modes |
![]() |
#10 |
I've been Wankeled!
Join Date: Apr 2010
Location: Mildmay, Ontario, Canada
Posts: 260
Rep Power: 16 ![]() |
Now we are at the real exciting part of the build, getting the beast to run. Nismo and I built the engine together and along with another friend of ours we installed the engine. We ended up having some clearance issues with the clutch and the bell housing of the transmission. I had to slightly clearance the bell housing and the clutch pressure plate to get the clutch to clear the bell housing. After that issue though the engine install went very smooth considering we were at it until around midnight. It fired up on the very first try! Here are pics of the engine install and first firing.
Rx4-1.jpgRx4-2.jpgRx4-4.jpgRx4-5.jpgRx4-6.jpg
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
![]() |
![]() |
Bookmarks |
|
|