F.S. 20B 3 rotor T2 Black single turbo w/ free rebuilt CHEAP

jamespond24 · 12-14-2010, 11:22 PM

Yes I said "3 rotor"

Here is a once in a lifetime to own a rare single turbo 3 rotor for a cheap price. Well I'm starting on my next project and needed the funds to get it started. I know the work is not the tighest or best looking but to get the 20B FC running that is capable of 800+rwhp for $15k is unheard of. Plus the motor just been rebuilted and on top of that I will give a one time free rebuilt for the new owner on but here is the catch. I willing to do the rebuilt if the motor fail due to detenation,stuck seal and/or coolant seal BUT I can't do it if it has a bad bearing failure. If the motor fail due to bearing failure I'm willing to work out a deal to help but it can't be for free.

Ok for the easy stuff

The motor is a streetport using 6 stock replacement rotary works titanium stud,BW 75mm turbo,lt16 microtech with 60psi map sensor,6 msd blaster,4 row FMIC w/ 3" stainless piping,ceramic coated LIM and UIM,rotary works 90mm TB,1200cc,1600cc,2 bosch 044 FP,aeromative FPR,ACT maxx clutch,SR motorsport lightweight flywheel,4" exhaust with magna flow muffler.

To be honest the body needs some work beside that the motor pulls hard up to 11psi. The car is capable of 800+rwhp with race gas and around 500+rwhp on pump gas. Please feel free to ask me any questions of your concerns and come by to take a closer look if you're in town. Sorry no free ride only serious buyer.

REMEMBER THIS IS A 3 ROTOR FOR $15k W/FREE REBUILT!!

12-14-2010, 11:22 PM	#1
jamespond24 Rotary Fanatic Join Date: Feb 2008 Posts: 157 Rep Power: 18	F.S. 20B 3 rotor T2 Black single turbo w/ free rebuilt CHEAP Yes I said "3 rotor" Here is a once in a lifetime to own a rare single turbo 3 rotor for a cheap price. Well I'm starting on my next project and needed the funds to get it started. I know the work is not the tighest or best looking but to get the 20B FC running that is capable of 800+rwhp for $15k is unheard of. Plus the motor just been rebuilted and on top of that I will give a one time free rebuilt for the new owner on but here is the catch. I willing to do the rebuilt if the motor fail due to detenation,stuck seal and/or coolant seal BUT I can't do it if it has a bad bearing failure. If the motor fail due to bearing failure I'm willing to work out a deal to help but it can't be for free. Ok for the easy stuff The motor is a streetport using 6 stock replacement rotary works titanium stud,BW 75mm turbo,lt16 microtech with 60psi map sensor,6 msd blaster,4 row FMIC w/ 3" stainless piping,ceramic coated LIM and UIM,rotary works 90mm TB,1200cc,1600cc,2 bosch 044 FP,aeromative FPR,ACT maxx clutch,SR motorsport lightweight flywheel,4" exhaust with magna flow muffler. To be honest the body needs some work beside that the motor pulls hard up to 11psi. The car is capable of 800+rwhp with race gas and around 500+rwhp on pump gas. Please feel free to ask me any questions of your concerns and come by to take a closer look if you're in town. Sorry no free ride only serious buyer. REMEMBER THIS IS A 3 ROTOR FOR $15k W/FREE REBUILT!!