1983 Limited Edition Resto/with some goodies - Rotary Car Club

		Rotary Car Club > Tech Discussion > Show your rotary car build up.
1983 Limited Edition Resto/with some goodies

Show your rotary car build up. Show off your Rotary Car build!

one320fc 1983 Limited Edition... 01-09-2011, 08:23 PM

PaperClip

one320fc So some of the pictures are... 01-09-2011, 08:31 PM

WE3RX7 Holy crap you made a build... 01-09-2011, 09:16 PM

one320fc Yea I know its a little out... 01-10-2011, 10:54 AM

diabolical1 engine bay looks pretty nice... 01-10-2011, 07:41 PM

one320fc It was all done in stages but... 01-10-2011, 08:08 PM

jerd_hambone Restorations make me....... 01-11-2011, 05:18 AM

one320fc Not sure about Frisky?... 01-11-2011, 08:05 AM

WE3RX7 Key point - put that shit... 01-11-2011, 06:44 PM

one320fc Oh don't worry you will have... 01-11-2011, 07:41 PM

WE3RX7 I'd have to work on your LE... 01-11-2011, 07:43 PM

RX-7 Chris cool build 01-12-2011, 12:01 PM

one320fc Thanks for the comments!! So... 01-13-2011, 08:06 PM

WE3RX7 ^ new hardware really is the... 01-13-2011, 09:07 PM

one320fc New pictures, almost time to... 01-14-2011, 09:56 PM

WE3RX7 Looks pretty good to me.. Its... 01-15-2011, 12:24 AM

one320fc Bill, I hope it will happen... 01-15-2011, 04:22 PM

one320fc So just a little update, We... 01-29-2011, 12:02 AM

2gslse Congrats on the house. now... 01-30-2011, 08:16 PM

one320fc Thats sweet Bill told me all... 01-31-2011, 08:46 PM

WE3RX7 I'll get some pics up - but... 02-20-2011, 05:03 PM

one320fc I have already started but... 02-20-2011, 08:40 PM

WE3RX7 Lol... get that hood off and... 02-20-2011, 10:54 PM

PaperClip

one320fc So here is a little update... 02-21-2011, 05:57 PM

one320fc Also found out today a guy a... 02-21-2011, 06:56 PM

RotorDad The Miata wouldn't happen to... 03-16-2011, 10:35 PM

one320fc Not sure about the Sparco's... 03-17-2011, 06:36 AM

WE3RX7 An old friend of ours lives... 03-22-2011, 05:44 PM

WE3RX7 Should've sealed that floor,... 02-21-2011, 08:42 PM

2gslse Garage looks good but it... 02-21-2011, 09:37 PM

one320fc It will look like that soon... 02-21-2011, 10:37 PM

WE3RX7 Man - we worked on the car on... 02-26-2011, 04:05 PM

one320fc Bill, Thank you so much!!... 02-26-2011, 09:16 PM

WE3RX7 Black?? I thought you were... 02-26-2011, 09:35 PM

chibikougan Lookin good. You guys seem to... 02-26-2011, 09:41 PM

one320fc Yea im going to stick with... 02-26-2011, 11:01 PM

chibikougan Hmm thats a toss up. If the... 02-26-2011, 11:07 PM

PaperClip

one320fc So this car only has 63k... 02-27-2011, 11:45 PM

2gslse I wouldn't worry about them... 02-28-2011, 04:38 PM

WE3RX7 2gslse - just noticed you had... 03-01-2011, 07:23 PM

one320fc Yea i'm not to worried about... 03-02-2011, 12:37 PM

one320fc OK so not really an update to... 03-15-2011, 12:41 PM

djmtsu I'm there with you on the... 03-15-2011, 08:12 PM

one320fc The carter is an off the... 03-16-2011, 10:51 AM

PaperClip

one320fc So got some new shit for the... 03-16-2011, 07:27 PM

2gslse Time to get that garage dirty... 03-16-2011, 08:44 PM

one320fc MC you know I like it dirty... 03-16-2011, 09:02 PM

2gslse Maybe this weekend I can head... 03-16-2011, 09:09 PM

one320fc sounds good!! I can fire up... 03-16-2011, 09:17 PM

RotorDad Should be able to, just let... 03-17-2011, 10:03 AM

WE3RX7 I think Sat is supposed to... 03-17-2011, 10:14 AM

one320fc Not sure, but I deffently... 03-17-2011, 06:13 PM

WE3RX7 We'll figure it out tomorrow... 03-17-2011, 08:14 PM

2gslse Will do. its sitting on the... 03-17-2011, 08:59 PM

PaperClip

one320fc So a little update: Bill and... 03-22-2011, 12:41 PM

djmtsu Don't forget to ditch that... 03-22-2011, 01:11 PM

one320fc Yea I am going to swap to a... 03-22-2011, 03:49 PM

WE3RX7 Don't encourage him, lol. Its... 03-22-2011, 05:47 PM

one320fc I dont need encouragement for... 03-22-2011, 06:50 PM

djmtsu Neither did my '84 GS, but... 03-22-2011, 08:04 PM

one320fc See Bill he agrees with me!!... 03-22-2011, 08:34 PM

WE3RX7 '84 GS isn't a rare model,... 03-23-2011, 06:56 PM

djmtsu That is why I swapped in an... 03-23-2011, 07:21 PM

RotorDad The guy I know with the turbo... 03-22-2011, 06:50 PM

WE3RX7 That name sounds familiar... 03-22-2011, 07:19 PM

WE3RX7 oh, and is your wiring... 03-23-2011, 06:57 PM

one320fc Jack A$$...is your project... 03-23-2011, 07:11 PM

WE3RX7 We can run out there this... 03-23-2011, 07:45 PM

PaperClip

one320fc Ha... I have proof that my V8... 03-25-2011, 12:07 PM

one320fc Good News!!! Build... 03-27-2011, 01:36 PM

WE3RX7 What is Shannon cleaning in... 03-27-2011, 02:48 PM

2gslse congrats!!! maybe this one... 03-27-2011, 02:50 PM

one320fc The alternator, but she... 03-27-2011, 03:52 PM

WE3RX7 Why not have her clean the S4... 03-27-2011, 08:00 PM

one320fc Its still in Amissville, she... 03-28-2011, 06:52 AM

PaperClip

one320fc So we got a little work done... 04-18-2011, 05:03 PM

WE3RX7 You know we're back in... 04-18-2011, 06:45 PM

2gslse That looks 100% better than... 04-18-2011, 08:06 PM

WE3RX7 As soon as they make socks... 04-18-2011, 08:15 PM

one320fc Sounds like a trips to... 04-18-2011, 09:00 PM

WE3RX7 I'll be in OH this weekend... 04-18-2011, 09:19 PM

PaperClip

one320fc So got a little progress done... 04-24-2011, 08:09 PM

WE3RX7 I didn't even notice you... 04-25-2011, 08:53 PM

one320fc yea I tired to cover as much... 04-26-2011, 03:09 PM

WE3RX7 What, no updates??? 06-12-2011, 08:21 PM

one320fc Lol I was getting ready to be... 06-13-2011, 11:42 AM

PaperClip

one320fc Got the flywheel resurfaced... 06-13-2011, 06:02 PM

WE3RX7 Thats it on pics? I got more... 06-13-2011, 08:57 PM

2gslse Looks good so far now you... 06-13-2011, 10:19 PM

WE3RX7 Bah - you ended having to go... 06-13-2011, 10:22 PM

2gslse Yeah... the H2O softener... 06-13-2011, 10:53 PM

one320fc Figured I would ad some more... 06-19-2011, 08:55 PM

one320fc Soon, I will have the motor... 06-19-2011, 08:57 PM

WE3RX7 Yay pics! Motor is getting... 06-19-2011, 09:06 PM

one320fc Yep, its a work in progress!... 06-20-2011, 06:58 AM

2gslse The rear looks great if you... 06-20-2011, 03:15 PM

WE3RX7 OOhh SNAP!! You just got told... 06-20-2011, 08:25 PM

2gslse My cars twin??? which car???... 06-20-2011, 08:56 PM

WE3RX7 Chris' car's twin. I plan... 06-20-2011, 09:09 PM

one320fc Ok, so motor didnt make it in... 06-28-2011, 03:07 PM

WE3RX7 Do you actually have cold... 06-28-2011, 07:51 PM

one320fc YES I have some ice cold BL... 06-28-2011, 08:43 PM

WE3RX7 Actually, that may not... 06-28-2011, 09:28 PM

WE3RX7 This thread needs more pics... 07-11-2011, 09:10 PM

WE3RX7 Its been an hour - where are... 09-09-2011, 10:16 PM

PaperClip

one320fc OK the motor is in!!!! 10953... 09-10-2011, 10:27 AM

WE3RX7 Finally :) Now get it... 09-10-2011, 11:03 AM

WE3RX7 No pics of the nice clutch... 09-10-2011, 11:04 AM

PaperClip

one320fc Looking good so far... 09-25-2011, 07:47 PM

one320fc Guess I really havnt said a... 09-25-2011, 07:57 PM

PaperClip

WE3RX7 Thought I'd throw up a pic of... 12-03-2011, 09:46 PM

WE3RX7 Port matched intake runners... 12-28-2011, 09:04 PM

WE3RX7 So many changes to this... 03-04-2012, 09:31 AM

PaperClip

one320fc I cant help it :rofl: dont... 03-05-2012, 10:34 AM

WE3RX7 Lol.. There is more work than... 03-05-2012, 12:26 PM

one320fc Ok so I will post up some... 03-07-2012, 04:21 PM

WE3RX7 I'm just excited to see you... 03-07-2012, 04:56 PM

PaperClip

one320fc So I figured it was time to... 03-14-2012, 06:56 PM

WE3RX7 Need the specs on that... 03-14-2012, 09:10 PM

one320fc Were you asking what the... 03-15-2012, 01:50 PM

WE3RX7 Is it dual pass? 03-15-2012, 02:36 PM

2gslse Looks great sitting there but... 03-15-2012, 03:00 PM

one320fc This sounds bad but I have no... 03-15-2012, 03:16 PM

2gslse its not a big deal really,... 03-15-2012, 03:38 PM

WE3RX7 Is there a weld in the middle... 03-15-2012, 04:14 PM

2gslse Yeah, time for him to stop... 03-15-2012, 04:21 PM

one320fc Had enough out of you! :o21:... 03-16-2012, 07:37 AM

WE3RX7 Him posting is probably my... 03-15-2012, 07:54 PM

2gslse Tic-Toc at least you are... 03-16-2012, 09:54 AM

WE3RX7 Here's some ideas for... 04-23-2012, 02:15 PM

PaperClip

one320fc Well its been a while and a... 06-20-2012, 06:15 PM

2gslse OK time to say it.. Stop... 06-22-2012, 08:22 PM

one320fc Geez cant ever catch a break... 06-23-2012, 10:44 PM

2gslse I almost had a cat tonight... 06-23-2012, 10:48 PM

WE3RX7 I told MC if I had free time... 06-24-2012, 11:57 AM

one320fc Well its time to make my way... 04-11-2013, 11:35 AM

WE3RX7 Won't be total open header if... 04-11-2013, 12:19 PM

PaperClip

2gslse Here ya go. 04-11-2013, 05:37 PM

one320fc You know its kinda funny you... 04-12-2013, 07:22 AM

WE3RX7 Its not a new GSLSE, lol..... 04-12-2013, 08:16 AM

WE3RX7 What no update? My update on... 04-14-2013, 08:33 AM

WE3RX7 Photo of the project right... 04-14-2013, 05:50 PM

WE3RX7 Thought I'd toss these up to... 04-28-2013, 07:36 PM

WE3RX7 This build needs updates :) 07-11-2013, 01:31 PM

one320fc Yup should have some on... 07-11-2013, 06:53 PM

WE3RX7 I'll bring champagne if it we... 07-11-2013, 07:07 PM

Prev

Previous Post

Next Post

Next

01-15-2011, 12:24 AM	#11
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Looks pretty good to me.. Its always bad when you have fresh paint and 25+ year everything else. Its ok though. We'll get that engine cleaned up and back in the hole and it'll look nice again. The rest of the acc. should be flat blacked and polished... a good mixture will set it off. When are you bringing the engine up to the shop?? Need to degrease that thing and get it lowered back in. Should take less time than painting the engine bay, lol... Ah - need to clean out that bell housing and input shaft too... Your wheels will probably take me another two weeks or so as well, but they should come out pretty good...

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 08:16 AM.