3mm Wire EDM cut rotors.

To_Slow · 03-05-2011, 08:09 PM

Here is some pics/video of some rotors that i wire EDM cut for a custo.

Uploaded with ImageShack.us

Uploaded with ImageShack.us
Video...

http://www.youtube.com/watch?v=fP0xpjf2ziw

Electrical Discharge Machining (commonly known as "EDM Machining") makes it possible to work with metals for which traditional machining techniques are ineffective. EDM machining equipment makes it is possible to cut small odd-shaped angles in hardened steel. The EDM machining process was developed by the aerospace and electronics industries to provide tolerances accurate to one ten thousandths of an inch. The accuracy of EDM makes it ideal for machining the 3mm opening to accommodate thicker apex seals. The resulting surface finish is ideal for use with any apex seal material and recommended for use carbon or ceramic apex seals.

03-05-2011, 08:09 PM	#1
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. Posts: 315 Rep Power: 18	3mm Wire EDM cut rotors. Here is some pics/video of some rotors that i wire EDM cut for a custo. Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Video... http://www.youtube.com/watch?v=fP0xpjf2ziw Electrical Discharge Machining (commonly known as "EDM Machining") makes it possible to work with metals for which traditional machining techniques are ineffective. EDM machining equipment makes it is possible to cut small odd-shaped angles in hardened steel. The EDM machining process was developed by the aerospace and electronics industries to provide tolerances accurate to one ten thousandths of an inch. The accuracy of EDM makes it ideal for machining the 3mm opening to accommodate thicker apex seals. The resulting surface finish is ideal for use with any apex seal material and recommended for use carbon or ceramic apex seals. __________________ My link Last edited by To_Slow; 03-05-2011 at 08:12 PM.