1980 Rx7

rotaeng · 02-20-2012, 01:00 AM

I have owned this 1980 Rx7 since 1982. I have completely overhauled the engine in addition to the Nikki Carburetor. I am having a problem with flooding such that there is a gas pool in the carburetor. I have now twice removed the air horn, rechecking and cleaning the jets. I also rechecked float levels and made absolutely sure they are perfect. The needle seat assembly freely moves without any problems. I tested the float bowl vent solenoid and is working OK. I have read over info at www.sterlingmetalworks.com and cannot solve this problem.
I can start it and get it to idle then with an increase of rpm, it starts pouring gas in, I think from the front bowl; then it floods and stalls.
Does anyone have any suggestions to solve this or recommendations of a Nikki carburetor rebuilder?
Thanks!!
.

02-20-2012, 01:00 AM	#1
rotaeng The Newbie Join Date: Feb 2012 Posts: 5 Rep Power: 0	1980 Rx7 I have owned this 1980 Rx7 since 1982. I have completely overhauled the engine in addition to the Nikki Carburetor. I am having a problem with flooding such that there is a gas pool in the carburetor. I have now twice removed the air horn, rechecking and cleaning the jets. I also rechecked float levels and made absolutely sure they are perfect. The needle seat assembly freely moves without any problems. I tested the float bowl vent solenoid and is working OK. I have read over info at www.sterlingmetalworks.com and cannot solve this problem. I can start it and get it to idle then with an increase of rpm, it starts pouring gas in, I think from the front bowl; then it floods and stalls. Does anyone have any suggestions to solve this or recommendations of a Nikki carburetor rebuilder? Thanks!! .