|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
|
Thread Tools | Display Modes |
05-11-2008, 09:11 PM
|
#6 |
|
Rotary Fanatic
Join Date: Mar 2008
Location: Brenham, TX
Posts: 335
Rep Power: 18  |
ok i tested at my ecu and found that pin 3d is not grounding out at the ECU. the ecu still displays the temperature of the water on my datalogit. DO the fans use the same sensor or is it a different one? Im trying to narrow down if its my ECU or a thermo sensor that tells the ecu when to ground out. There is also mention of the powertrain module or something what does it do in all of this?
__________________
500+ HP thanks to:  Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap! |
|
|
| Bookmarks |
|
|
Threaded Mode