My RX7SP build up - Rotary Car Club

RICE RACING My RX7SP build up 02-13-2010, 07:33 PM

RICE RACING Here is "finished" engine bay... 02-13-2010, 07:35 PM

RICE RACING I have a ram air sealed air... 02-13-2010, 07:37 PM

RICE RACING Bitches love fisting 02-13-2010, 07:39 PM

RICE RACING Here is the Kerb Weight of my... 02-13-2010, 07:48 PM

RICE RACING This may be of interest to... 02-13-2010, 07:52 PM

05rex8 impressive! 02-13-2010, 08:42 PM

djmtsu Wow! 02-14-2010, 09:47 AM

sk8world "very" nice work!!!!!!! ... 02-14-2010, 08:24 PM

RICE RACING Thanks for the nice words,... 02-14-2010, 08:42 PM

scotty305 Great thread and nice photos.... 02-15-2010, 02:22 AM

RICE RACING Turbine inlet and Turbine... 02-15-2010, 03:14 AM

RICE RACING Bitches love fisting 02-15-2010, 03:31 AM

Herblenny Impressive.. I am... 02-15-2010, 09:38 AM

RICE RACING Overall? I wanted single... 02-15-2010, 03:37 PM

sk8world Phil, Not sure if you are... 02-15-2010, 02:57 PM

Force13b All these great projects... 02-15-2010, 05:37 PM

EJayCe996 I spy jizz on the ohlins!... 02-15-2010, 05:43 PM

Herblenny Peter Thanks for the info. ... 02-15-2010, 05:51 PM

RICE RACING That's ok its only the first... 02-15-2010, 06:03 PM

dudemaaan As always very nice work... 02-15-2010, 07:00 PM

RICE RACING Tested the compression of the... 02-16-2010, 09:09 PM

Gabriel82 wow my eyes hurt from the bad... 02-19-2010, 05:45 PM

sk8world So am I wrong or isnt this... 02-26-2010, 01:08 AM

Barry Bordes Peter, Your setup is the... 05-31-2010, 09:40 AM

RICE RACING Been a while since I have... 06-04-2010, 05:40 AM

RICE RACING Here is one graph, I think I... 06-04-2010, 06:07 AM

lh6601 Oh god yes. 05-31-2010, 06:10 PM

Barry Bordes Peter from your data the... 06-05-2010, 07:31 AM

RICE RACING Hi Mate, I have done allot... 06-05-2010, 07:29 PM

Barry Bordes Peter, thanks for the links.... 06-07-2010, 08:33 AM

RICE RACING Thanks Barry, I am looking... 06-07-2010, 07:39 PM

RICE RACING Action shot ... 06-14-2010, 08:02 AM

RICE RACING Just finished a major (for... 11-01-2010, 04:28 AM

RICE RACING Drove her today :) its... 11-02-2010, 01:13 AM

Mazdabater She is a gorgeous car rice. ... 06-11-2010, 08:33 PM

project86 VERY NICE BUILD! Pics are... 06-11-2010, 09:55 PM

RICE RACING Thanks everyone :001_005: ... 06-12-2010, 12:53 AM

JerryLH3 The craftsmanship on your car... 06-13-2010, 04:03 PM

Max777 car aside.... damascus... 06-19-2010, 12:34 PM

RICE RACING Yes mate, full damascus... 06-19-2010, 08:07 PM

RICE RACING Been a while since I posted... 10-09-2010, 04:13 PM

Herblenny COOL! Can't wait to see some... 10-10-2010, 10:46 PM

RICE RACING Want to show the true... 10-11-2010, 01:50 AM

benlewisMAV Nice knives! :D oh and the FD... 10-11-2010, 05:13 AM

Herblenny Very nice!! 11-02-2010, 02:43 AM

RICE RACING Thanks mate :) I also put... 11-05-2010, 05:08 AM

RICE RACING Here is some preliminary... 11-06-2010, 04:15 AM

RICE RACING I have a fair bit of... 11-06-2010, 11:59 PM

RICE RACING Polished the bad boy today,... 11-14-2010, 10:35 AM

RICE RACING Well :) Fitted up the new... 12-02-2010, 05:25 AM

More replies below current depth...

RICE RACING Thanks, good to see some... 12-04-2010, 08:50 PM

TitaniumTT A few things here... first,... 11-06-2010, 06:03 AM

RICE RACING After consulting with BDC and... 11-06-2010, 06:23 AM

RICE RACING More "box" for you... 11-06-2010, 06:42 AM

NoDOHC How level does the surface... 12-05-2010, 12:21 AM

RICE RACING The level makes no difference... 12-05-2010, 12:50 AM

RICE RACING got milk! 12-06-2010, 05:41 AM

RICE RACING I have edited video showing... 12-06-2010, 06:39 AM

RICE RACING http://www.youtube.com/watch?v... 12-06-2010, 08:37 AM

RICE RACING :conehead: Here is the graph... 12-10-2010, 08:36 PM

More replies below current depth...

RICE RACING New record for my little cat... 12-17-2010, 10:36 PM

RICE RACING http://www.youtube.com/watch?v... 12-18-2010, 01:59 AM

Trout2 You tube says you're video is... 12-11-2010, 05:21 PM

NoDOHC Wow! Emissions legal. Your... 12-12-2010, 01:18 AM

RICE RACING Thanks man, I worked very... 12-13-2010, 01:44 AM

NoDOHC That is a fact. It may cost... 12-13-2010, 09:49 PM

FC3S Murray Nice video man! So if my math... 12-21-2010, 01:59 PM

RICE RACING Thanks very much. On the... 12-21-2010, 06:02 PM

RICE RACING I have been into rotaries... 12-22-2010, 03:13 AM

RICE RACING No you see why I have very... 12-22-2010, 08:08 PM

diabolical1 well done, man. what you... 01-03-2011, 01:58 AM

RICE RACING Well said :hurray: :iagree: ... 01-03-2011, 03:23 AM

RICE RACING RICESP does 8500rpm limiter... 12-28-2010, 05:59 PM

TitaniumTT No, your shit blew up becuase... 12-28-2010, 06:44 PM

RICE RACING ^ Have to say I agree,... 12-30-2010, 05:18 PM

RICE RACING Well have had an unreal... 01-01-2011, 05:43 PM

FC3S Murray :toetap05: ...the wound is... 01-05-2011, 11:18 PM

EJayCe996 Congrats on being a feature... 01-06-2011, 02:38 PM

More replies below current depth...

RICE RACING Done a bit more fine tuning... 01-02-2011, 09:12 PM

NoDOHC I agree whole-heartedly. 01-04-2011, 09:09 PM

Barry Bordes Peter, hope you fared OK with... 01-25-2011, 08:16 AM

RICE RACING R.I.P One dyno machine :88: 02-12-2011, 07:08 AM

ChaserAero Coming in way late but the... 01-25-2011, 09:53 AM

RICE RACING Hey boys :biggthumpup: No... 01-25-2011, 05:19 PM

rdgt99 Very impressive build. ... 01-26-2011, 01:16 AM

RICE RACING My New dash board :fawk: ... 01-26-2011, 05:38 AM

TitaniumTT 72.5 psi Note to... 01-26-2011, 08:24 AM

RICE RACING 58psi "gauge pressure" as all... 01-26-2011, 08:38 AM

calicrewchief http://www.youtube.com/watch?v... 01-26-2011, 11:29 PM

RICE RACING More development and fine... 02-05-2011, 11:43 PM

RICE RACING Show update: The dyno was... 02-12-2011, 04:52 AM

rdgt99 Very impressive stuff!! ... 02-12-2011, 08:54 AM

RICE RACING Thanks :) The next stage... 02-12-2011, 05:35 PM

RICE RACING Compression measure on... 02-20-2011, 04:09 AM

RICE RACING Here is pics of the RR COP CD... 03-05-2011, 01:02 AM

More replies below current depth...

RICE RACING To give this comparison test... 03-18-2011, 05:46 PM

Mazdabater http://cgi.ebay.com.au/FD3S-RX... 03-24-2011, 04:24 AM

RICE RACING Sounds like a total fucken... 03-24-2011, 06:07 PM

Mazdabater GET FUCKED WHY DON'T I HAVE... 03-24-2011, 04:29 AM

RICE RACING Still a nice car for a... 03-24-2011, 06:09 PM

RICE RACING BACK ON TOPIC! Here is the... 03-24-2011, 06:10 PM

RICE RACING I just found 2 original... 03-24-2011, 06:16 PM

More replies below current depth...

Mazdabater You been on ausrotary lately... 03-26-2011, 07:43 PM

RICE RACING I know every SP in the... 03-26-2011, 07:57 PM

RICE RACING Got Wing ! ... 04-17-2011, 04:35 AM

RICE RACING Current engine bay set up... 04-17-2011, 04:45 AM

project86 I love your FD man. Loads of... 04-17-2011, 11:20 AM

RICE RACING Daily is a new FJ Cruiser :)... 04-17-2011, 04:30 PM

project86 Well its definitely an... 04-17-2011, 08:45 PM

RICE RACING Get On It POOFTERS :-oc==3 04-24-2011, 09:09 PM

Mazdabater Lol just push it higher till... 04-25-2011, 01:55 AM

RICE RACING The package I have made in... 04-25-2011, 02:57 AM

Mazdabater Come on rice 50psi pump fuel.... 04-25-2011, 03:34 AM

RICE RACING ^ This cars limit is ~36psi,... 04-25-2011, 03:42 AM

RICE RACING The performance is but one... 04-25-2011, 03:56 AM

MaD^94Rx7 I like the way you approach... 04-25-2011, 06:10 AM

RICE RACING I learned long ago that there... 04-25-2011, 06:20 AM

MaD^94Rx7 Awesome stuff! 04-25-2011, 06:56 AM

RICE RACING It's the best advertising... 04-25-2011, 06:44 PM

classicauto You're running NRS ceramics... 04-26-2011, 01:03 PM

RICE RACING ^ No and No. ^ The engine... 04-26-2011, 04:07 PM

project86 So all of your performance... 04-26-2011, 05:03 PM

RICE RACING Real Power, see the VBOX... 04-26-2011, 06:14 PM

More replies below current depth...

project86 Well then :) Maybe ill... 04-27-2011, 07:11 AM

RICE RACING I have no shortage of ca$h or... 04-27-2011, 07:23 AM

MaD^94Rx7 Correct me if I'm wrong Pete... 04-27-2011, 10:37 AM

RICE RACING I run BOTH. During the... 04-27-2011, 03:59 PM

project86 Are you Ohlins coilovers... 04-29-2011, 08:41 AM

classicauto I'm surprised to hear that... 04-29-2011, 10:10 AM

RICE RACING The Ohlins are a beautiful... 04-29-2011, 04:35 PM

RICE RACING No one has gone to the extent... 04-29-2011, 04:55 PM

Mazdabater What spark plugs are you... 04-29-2011, 06:00 PM

RICE RACING I still use the Trust... 04-29-2011, 06:13 PM

Mazdabater No you won't you'll post it... 04-29-2011, 06:26 PM

RICE RACING I know its hard to tell over... 04-29-2011, 07:08 PM

RICE RACING LOL Dyson here run buses LOL,... 09-24-2011, 05:39 PM

RICE RACING Some more pics of my ride ;)... 12-04-2011, 01:24 AM

project86 for some reason i thought... 04-29-2011, 07:13 PM

RICE RACING Seals start another thread... 04-30-2011, 12:35 AM

Mazdabater I'm sold then. Now just... 04-29-2011, 08:07 PM

Flash You have quite the nice ride.... 04-30-2011, 02:02 PM

RICE RACING Thanks :) Fuel system is... 04-30-2011, 11:24 PM

RICE RACING Testing on going ! 06-13-2011, 12:45 AM

RICE RACING Well the best just keeps... 09-23-2011, 07:13 PM

RICE RACING Changed this fuel system set... 09-23-2011, 07:23 PM

MaD^94Rx7 Hey Pete watchin this and... 09-24-2011, 02:50 AM

Mazdabater Cmon rice don't tease me,... 09-24-2011, 11:24 AM

RICE RACING Soon brother soon :party: ... 09-24-2011, 05:35 PM

RICE RACING Get On It...... Fact V's... 12-05-2011, 11:35 PM

RICE RACING :party: Well got RICESP... 12-10-2011, 09:14 PM

RICE RACING "Got Grip C*nts" :auto: Ho Ho... 12-20-2011, 12:40 AM

MaczPayne Need vids! :) 12-12-2011, 03:54 PM

knonfs INDEED! Peter - Are you... 12-12-2011, 05:04 PM

RICE RACING Hey there, No I use and... 12-12-2011, 05:57 PM

knonfs Love to hear that, seems like... 12-12-2011, 06:55 PM

More replies below current depth...

JhnRX7 Nice! Now its time to do the... 12-20-2011, 08:24 AM

RICE RACING SP 1995 the Don! 12-20-2011, 05:13 PM

RICE RACING Here is a great series of... 12-21-2011, 05:48 PM

RICE RACING Anyway of enough talk of... 12-22-2011, 12:25 AM

RICE RACING Get on It :-0c==3 12-31-2011, 11:22 PM

Mazdabater Wtac machines aren't all just... 12-21-2011, 08:36 PM

RICE RACING The only thing incredible is... 12-21-2011, 09:59 PM

FC3S Murray Damn that youtube vid you... 12-22-2011, 05:58 PM

RICE RACING Get on It :-0c==3 12-22-2011, 06:27 PM

yzf-r1 Beautiful car - glad I found... 01-04-2012, 02:17 AM

JhnRX7 Rice, How do you like the... 01-08-2012, 12:43 PM

RICE RACING My car is a street car 100% ... 01-08-2012, 04:22 PM

yzf-r1 Isn't that 14 kg/mm (780... 01-08-2012, 05:36 PM

RICE RACING Sorry I was thinking boost... 01-08-2012, 09:50 PM

RICE RACING Here is some pics of the IC... 01-15-2012, 06:44 AM

RICE RACING Took the bad boy out today :)... 01-20-2012, 10:42 PM

More replies below current depth...

RICE RACING This is the standard RICE... 12-15-2012, 07:23 PM

RICE RACING Race Logic VBOX proven ;) ... 12-15-2012, 07:32 PM

Libor Peter, there is something I... 04-01-2012, 07:34 PM

RICE RACING I do my system for simplicity... 04-01-2012, 08:04 PM

Libor This goes hand in hand with... 04-02-2012, 11:14 AM

RICE RACING I doubt you will find any... 04-02-2012, 04:42 PM

More replies below current depth...

WE3RX7 So a 911 RS is still faster... 12-15-2012, 11:56 PM

RICE RACING And a Ford Pinto is about 3... 12-16-2012, 12:00 AM

RICE RACING As a funny side note: True... 12-16-2012, 12:25 AM

ROT8WA Would be nice to see... 04-19-2013, 12:02 PM

RICE RACING Do NOT confuse this for a... 04-19-2013, 07:31 PM

More replies below current depth...

RICE RACING The RX7SP dominated the full... 12-16-2012, 12:05 AM

Topgear Nice tubs Peter ;) borg all... 04-20-2013, 03:22 PM

RICE RACING It is a S400SX3-82 (1300+bhp... 04-20-2013, 11:42 PM

Topgear Sexy it's the next up from... 04-21-2013, 04:17 AM

RICE RACING correct :coolgleamA: :auto: 04-21-2013, 04:40 PM

Mutaku Such a beautiful car, great... 04-23-2013, 06:28 PM

RICE RACING Thanks mate, Yes it is... 04-24-2013, 10:36 PM

RICE RACING More detail pics of the UNIT!... 04-25-2013, 05:35 AM

chibikougan Kittay is not amused! Exactly... 04-25-2013, 05:52 PM

RICE RACING I wont do any BDC or HC style... 04-25-2013, 10:24 PM

MaczPayne ^lol 04-27-2013, 10:56 PM

TitaniumTT Hey Peter.... you will have... 05-11-2013, 07:42 AM

RICE RACING No problem Brian :coolgleamA:... 05-11-2013, 06:59 PM

RICE RACING This is an example of how to... 05-11-2013, 07:19 PM

JhnRX7 I am using the exact same... 05-29-2013, 11:24 AM

RICE RACING Yeah that is good to hear... 05-29-2013, 07:08 PM

RICE RACING Some better screen set ups... 10-09-2013, 06:50 AM

grantrx4 That's a good article to... 11-24-2013, 03:20 PM

Brad this car needs to enter... 05-29-2013, 09:47 AM

silverfdturbo6port Nice! Where do you get all... 10-09-2013, 07:50 PM

RICE RACING ^All over the place^, lots of... 10-09-2013, 08:32 PM

RedR1 SO, SO True!! about 10 years... 10-14-2013, 05:17 AM

RICE RACING I still have the habit like... 10-14-2013, 07:35 AM

silverfdturbo6port Makes sense. So its safe to... 10-09-2013, 08:45 PM

RICE RACING Have no idea who they are but... 10-14-2013, 04:21 AM

RICE RACING F1 will learn many things to... 11-25-2013, 02:31 AM

Mitchocalypse Hold on.. you wait until you... 11-25-2013, 03:38 AM

RICE RACING Almost there, but it's about... 11-25-2013, 04:48 AM

grantrx4 Fair play. Are you running... 11-25-2013, 04:52 PM

RICE RACING I use a custom made and RR... 11-26-2013, 05:41 AM

Fendamonky So no more t04z? 11-26-2013, 09:01 AM

grantrx4 Sounds very interesting So... 11-26-2013, 04:45 PM

RICE RACING Some dash configuration shots... 12-15-2013, 06:45 AM

RICE RACING These are new shots of the... 12-19-2013, 10:49 PM

kraftjason413 wow! I just looked through... 11-26-2013, 10:51 AM

RICE RACING Look up Mazda M2 1020 this is... 11-26-2013, 02:43 PM

Dannobre Nice new toys :) 12-20-2013, 09:39 AM

RICE RACING UyYY73VfJJQ&feature=youtu.be... 12-26-2013, 01:23 AM

Pete_89T2 I like the customizable... 12-26-2013, 07:06 AM

RICE RACING It's the BDC & HC fail safe... 12-27-2013, 01:15 AM

RICE RACING These are some of the pages I... 02-07-2014, 07:06 PM

jacobcartmill RICE, can you post some... 02-08-2014, 10:11 PM

RICE RACING It's Pectel CAN data stream... 02-09-2014, 05:17 AM

RICE RACING Some updates happening .... ... 12-03-2014, 12:52 AM

Fendamonky You must love your seafood... 12-03-2014, 10:14 AM

C. Ludwig http://essentialsofnutrition.f... 12-03-2014, 10:39 AM

speedjunkie ^Damn those look good haha. ... 12-03-2014, 10:58 AM

RICE RACING On the RICE RACING rotors: *... 12-03-2014, 04:33 PM

Fendamonky I believe scalloping the... 12-03-2014, 01:02 PM

C. Ludwig More duration without overlap. 12-03-2014, 01:34 PM

RICE RACING As stated its mostly done to... 12-03-2014, 04:49 PM

Prodigy That scalloped rotor is the... 12-03-2014, 09:30 PM

C. Ludwig I didn't take into account... 12-04-2014, 09:03 AM

RICE RACING Thanks, I will also have... 12-04-2014, 05:19 PM

Prodigy Did you modify the size/shape... 12-04-2014, 08:13 PM

RICE RACING YES, it is the only way to... 12-04-2014, 08:29 PM

RICE RACING YES, it is the only way to... 12-04-2014, 08:37 PM

speedjunkie OK thanks! 12-05-2014, 03:53 PM

Prodigy Hey Rice, links to the... 12-27-2014, 10:16 PM

RICE RACING Nup, fuck imageshack, no time... 12-28-2014, 04:04 AM

RICE RACING Fact from Fiction 12-31-2014, 06:30 AM

RICE RACING Fits like a finger in an anus... 12-31-2014, 06:49 AM

RICE RACING This is how far it hangs out,... 01-01-2015, 05:00 PM

chibikougan Ooooh:o16: 01-01-2015, 05:12 PM

RICE RACING Here is another view showing... 01-03-2015, 08:21 PM

Fendamonky Looks good Peter. If you need... 12-31-2014, 09:09 AM

speedjunkie Yeah I'm switching to the AEM... 12-31-2014, 06:48 PM

RICE RACING Drawing the c-u-n-t of a coil... 12-31-2014, 07:02 PM

Reclaimer Auto Nicccccce 12-31-2014, 10:52 PM

RICE RACING Finished this part of it, all... 12-31-2014, 11:24 PM

RICE RACING Almost done, quick model of... 01-01-2015, 03:10 AM

RICE RACING This is the final positioning... 01-01-2015, 05:15 AM

speedjunkie Damn. I've never even worked... 01-01-2015, 09:01 AM

RICE RACING Yes it is hard on the brain@!... 01-01-2015, 01:22 PM

dakar318 The way you say **** in every... 01-01-2015, 09:41 AM

RICE RACING Finished set up, I want the... 01-02-2015, 02:54 AM

chibikougan I do like that mount. Nice... 01-02-2015, 03:16 AM

RICE RACING The detail is in there, cant... 01-02-2015, 04:07 AM

RICE RACING Last pic....................... 01-02-2015, 04:10 AM

speedjunkie DAAAAAAAMN. Looks REALLY... 01-02-2015, 02:50 PM

Fendamonky Looks sexy Peter!!! Any... 01-02-2015, 04:37 PM

RICE RACING Thanks boys, in regards to... 01-03-2015, 01:22 AM

Slides Looks good. Will there be... 01-03-2015, 06:24 AM

RICE RACING I intentionally try to keep... 01-03-2015, 06:50 AM

speedjunkie I'll be taking my car to... 01-03-2015, 01:04 PM

RICE RACING Yeah, I'll be making it for... 01-03-2015, 08:12 PM

RICE RACING HALF NAZI spring installed... 01-03-2015, 11:23 PM

RICE RACING More optimization! :suspect:... 01-04-2015, 12:56 AM

RICE RACING Finished! now back to MS... 01-04-2015, 04:49 AM

speedjunkie Sweet! 01-04-2015, 04:09 PM

RICE RACING Thanks :302: I've done... 01-04-2015, 04:21 PM

speedjunkie I actually thought your... 01-04-2015, 10:41 PM

RICE RACING Advantages * zero power loss... 01-04-2015, 10:50 PM

speedjunkie Cool, to me it looks like all... 01-04-2015, 11:13 PM

RICE RACING COP Adaptor is finished with... 01-05-2015, 10:34 PM

RICE RACING Pretty much over this now... 01-05-2015, 10:49 PM

GySgtFrank That looks like a very nicely... 01-05-2015, 11:02 PM

RICE RACING Thanks man, smashed up a gay... 01-06-2015, 12:12 AM

RICE RACING Fuel Injector O-Ring for coil... 01-06-2015, 07:12 AM

RX SE7EN Looks great. Why are you... 01-06-2015, 09:19 AM

RICE RACING These popular coils will not... 01-06-2015, 01:54 PM

RICE RACING OK! I did a major redesign... 01-06-2015, 05:30 PM

Slides might try to swap my cars... 01-06-2015, 09:09 PM

Fendamonky Looks good Peter, I'm liking... 01-07-2015, 08:41 AM

RICE RACING Yeah its the best you can do... 01-07-2015, 09:29 AM

Fendamonky Meh, that's like getting a... 01-07-2015, 09:39 AM

speedjunkie Fully agree. No way I'd get... 01-07-2015, 12:47 PM

More replies below current depth...

Dannobre When do we get to play with a... 01-13-2015, 09:10 PM

RICE RACING very soon :) 01-13-2015, 09:32 PM

Dannobre Hurry up then.....I have a... 01-13-2015, 09:34 PM

RICE RACING .............. 01-13-2015, 10:13 PM

Dannobre Damn...1300HP 2... 01-13-2015, 11:22 PM

RICE RACING I also finished a version of... 01-14-2015, 06:56 PM

chibikougan Fine just take all my monies... 01-14-2015, 06:58 PM

RICE RACING RR bespoke design rubber... 01-16-2015, 11:43 PM

sa22c I will be mighty tempted on a... 01-22-2015, 06:15 AM

RICE RACING While I have not owned... 01-22-2015, 06:18 AM

sa22c When you say Race stuff made... 01-22-2015, 07:23 AM

RICE RACING Proflex mainly ride height... 01-22-2015, 07:57 AM

RICE RACING ........... 01-29-2015, 08:21 AM

RICE RACING ........... 01-31-2015, 10:57 PM

RICE RACING .............. 02-21-2015, 08:25 PM

RICE RACING Some more angles of the Don ... 03-20-2015, 04:32 AM

V8eter Very nice peter, presentation... 02-21-2015, 09:33 PM

RICE RACING Thanks, one thing is for sure... 02-24-2015, 08:03 AM

RICE RACING Some new porting to test... 03-14-2015, 01:25 PM

Topgear Great work peter I'm on... 03-15-2015, 02:33 PM

RICE RACING ............. 03-15-2015, 03:09 PM

Slides Obviously you are increasing... 03-16-2015, 12:26 AM

RICE RACING I am not sure how much... 03-16-2015, 01:16 AM

RICE RACING Just got a new clutch for the... 04-06-2015, 07:27 PM

chibikougan OOoooh what kind and why no... 04-06-2015, 08:12 PM

RICE RACING ATS 3 plate carbon, will take... 04-06-2015, 08:17 PM

chibikougan Oooh now I must have pics! 04-06-2015, 08:21 PM

RICE RACING someone say misfire? NOT... 04-10-2015, 01:11 AM

chibikougan Ship it! NAOW! 04-10-2015, 01:16 AM

Slides Is that the new one with both... 04-07-2015, 02:38 AM

RICE RACING No I got this semi carbon one... 04-07-2015, 03:20 AM

RICE RACING The 'un sprung' center is... 04-07-2015, 03:28 AM

RICE RACING My clutch turned up :) pretty... 04-09-2015, 02:49 AM

chibikougan MOTHER OF GOD!:drool5: 04-09-2015, 03:02 AM

Slides Interesting the way they have... 04-09-2015, 07:21 AM

RICE RACING Yeah it looks ok, just as a... 04-09-2015, 08:15 AM

RICE RACING Some c-u-n-t-s may find it... 04-09-2015, 08:22 AM

RICE RACING I engraved the clutch today... 04-10-2015, 02:52 AM

chibikougan That makes things a little... 04-10-2015, 03:23 AM

RICE RACING This is the way it should... 04-10-2015, 03:40 AM

chibikougan Yeah that should line them up... 04-10-2015, 03:51 AM

RICE RACING ............. 06-09-2015, 06:30 AM

RICE RACING ......... 06-15-2015, 02:27 AM

RICE RACING I engraved the clutch today... 04-10-2015, 02:51 AM

RICE RACING Clutch disks obviously are... 04-10-2015, 03:55 AM

chibikougan Seems like a no brainer to... 04-10-2015, 04:27 AM