Brake rotor choices... which one?

[My5ABaby]

Originally Posted by RETed

You need to break in any new brake rotors and / or brake pads.


-Ted

I've heard of breaking in the pads (After installing new pads make 6 to 10 stops from approximately 35 mph with moderate pressure. Make an additional two to three hard stops from approximately 40 to 45 mph), but I hadn't heard of one for rotors. Or is it the same thing?

In my case, I'll be putting on a new set of Hawk HPS' and new calipers along with the new rotors.

Edit: I found this: http://shielsmasonry.com/Beddingpadsandrotors.pdf . It would seem that I could break in the rotors and pads at the same doing what the I put in parentheses above (After installing new pads make 6 to 10 stops from approximately 35 mph with moderate pressure. Make an additional two to three hard stops from approximately 40 to 45 mph)