Not holding idle

Dr-Rotor · 08-11-2008, 06:43 PM

O & yea your PIM....had the incorrect voltage thats why it was highlighted. You VTA seems fine...leav it. Adjust your idel...check to see if the smoke goes away.

Did you let the car warm right up? Let it go to 80c..then check to see if it smokes.
Do you still have the airpump on or off? If on..unplug it if you have no Cat.

Check that you did not bump your crank angle sensor when you were washing the car...thats a killer as it will loose its timing & run like shit.

08-11-2008, 06:43 PM	#9
Dr-Rotor Rotary Fan in Training Join Date: Aug 2008 Location: Auckland Posts: 70 Rep Power: 18	O & yea your PIM....had the incorrect voltage thats why it was highlighted. You VTA seems fine...leav it. Adjust your idel...check to see if the smoke goes away. Did you let the car warm right up? Let it go to 80c..then check to see if it smokes. Do you still have the airpump on or off? If on..unplug it if you have no Cat. Check that you did not bump your crank angle sensor when you were washing the car...thats a killer as it will loose its timing & run like shit. Last edited by Dr-Rotor; 08-11-2008 at 06:49 PM. Reason: adding