Re-routing of HVAC piping and relocation of units

[vex]

Originally Posted by Max777

umm, can you please be more clear on what you mean? Have you taken the dash off and seen just how BIG the units are? I took off the entire AC system, and that helped, but, for example, the heater core is so huge that the only place it can really go is the stock location behind the dash right in the middle.

I'm really confused with what you are trying to say.

the actual HVAC units i'm planning on leaving in the stock location, I'm talking more along the lines of altering where the pipes enter the cabin to connect to those units. for example I'm thinking of moving and fabbing up my own low pressure line by having the line enter the cabin on the drivers side then shoot across to the hookup. The high pressure line will probably be run through the fenders and hook up within the fender. This is of course just rough ideas.

As for the heat i'm thinking of doing the same.