|
Old School Rotary (Pre-1979) Pre-1979 Discussion including performance modifications and technical support sections |
|
Thread Tools | Display Modes |
![]() |
#1 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
The RX-2 / Capella / 616 / 618 Info Thread
Base specifications of the RX-2 / Capella / 616 / 618
The best way to look at this is from a year to year perspective. All of the engine related technical information is in regards to a rotary powered vehicle unless otherwise noted. 1970 General info here Specifications Wheelbase: 97 inches Length: 163 inches Width: 62.2 inches Height: ???? inches Ride Height: ???? inches Track: Front ??? / Rear ???? Curb Weight: 2,315 lbs ???? Mpg ????? Gallon Gas Tank *The engine was carbureted with a 4 barrel Hitachi, 12A four port engine with a 9.4:1 compression ratio. Rated at ??? HP @ 7000 and ??? ft/lbs @ 4000. *There were two transmissions available; a four speed manual and ????????? . Manual gearing was as follows?????????????: 1st: 3.380 2nd: 2.002 3rd: 1.390 4th: 1.000 1974 General info here Specifications Wheelbase: 97 inches Length: 163 inches Width: 62.2 inches Height: ???? inches Ride Height: ???? inches Track: Front ??? / Rear ???? Curb Weight: 2,315 lbs ???? Mpg ????? Gallon Gas Tank *The engine was carbureted with a 4 barrel Hitachi, 12A four port engine with a 9.4:1 compression ratio. Rated at ??? HP @ 7000 and ??? ft/lbs @ 4000. *There were two transmissions available; a four speed manual and ????????? . Manual gearing was as follows?????????????: 1st: 3.380 2nd: 2.002 3rd: 1.390 4th: 1.00 Paint Codes ![]()
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook Last edited by Whizbang; 04-09-2013 at 09:02 PM. |
![]() |
![]() |
Bookmarks |
|
|