flooding out FC3S4 N/A

Shadow24v · 04-30-2009, 01:06 PM

well, it looks like its eaten over 1/2 a quart of oil in about 30 minutes of run time. It was at the F mark on the dipstick when i first started it after all the work, now its down to halfway between the F and Add mark. It still smokes like a banshee and the MOP seems ok, the lever moves freely and all. the J-yard MOP was frozen and missing the lines and injectors so i didn't get it. It was also idling up and down between 1000 and 1500 before i turned it off. smoke got worse with rpms as well

is this probably a case of bad oil seals then?

04-30-2009, 01:06 PM	#24
Shadow24v Rotary Fan in Training Join Date: Feb 2009 Posts: 69 Rep Power: 17	well, it looks like its eaten over 1/2 a quart of oil in about 30 minutes of run time. It was at the F mark on the dipstick when i first started it after all the work, now its down to halfway between the F and Add mark. It still smokes like a banshee and the MOP seems ok, the lever moves freely and all. the J-yard MOP was frozen and missing the lines and injectors so i didn't get it. It was also idling up and down between 1000 and 1500 before i turned it off. smoke got worse with rpms as well is this probably a case of bad oil seals then? Last edited by Shadow24v; 04-30-2009 at 01:12 PM.