FD - Camber adjustment based on tire temps

josh18_2k · 07-06-2009, 06:07 PM

i'm at 1.8 degrees rear, and running hot on the inside (possibly from my sliding shenanagins lol). plan to dial it back to 1.5 and see how that goes.
is your temp split same front and rear? 2 seems like a bit much in the back, since you ahve a good camber curve and stiff springs, but im no FD expert by any means

also- 26F?? i would assume we have similar weights front and rear, and i'm running 30F and 28R. grip seemed to go down any lower than like 29F. i know vette guys run 32F 29R

07-06-2009, 06:07 PM	#2
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR Posts: 473 Rep Power: 18	i'm at 1.8 degrees rear, and running hot on the inside (possibly from my sliding shenanagins lol). plan to dial it back to 1.5 and see how that goes. is your temp split same front and rear? 2 seems like a bit much in the back, since you ahve a good camber curve and stiff springs, but im no FD expert by any means also- 26F?? i would assume we have similar weights front and rear, and i'm running 30F and 28R. grip seemed to go down any lower than like 29F. i know vette guys run 32F 29R __________________ Last edited by josh18_2k; 07-06-2009 at 06:11 PM.