Rotary Engine Failure due to Side Rotor/Side Rotor Housing Clearance..

[Herblenny]

Thank you for your input Rx4ur7!

Originally Posted by rx4ur7

Side seal clearance was not increased drastically. There is no difference between SS and CS. The clearance of SS in the rotor is different because of the design of the new SS.
Rotor to side housing clearances are less .12-.21mm for FD, .05-.19mm for Renesis.

That's interesting.. I was looking for that information about FD vs Renesis clearance.. Thanks for posting that.

Originally Posted by rx4ur7

If you are inducing any blow by it will shorten the life of the motor. First by contaminating the oil and building up combustion gases in the oil containment system. Beside loss of power.

Same thing was also told by another very experienced builder.