gauges drawing power

Garfinkles Motor Works · 08-16-2009, 04:12 PM

I removed that unit and found a switched wire in the back that was a big gage.I ran several small wires from the connector out several inches and put fuseholders on each .I replace the unit and used the wires to power several things as needed .There may be one or two ready to receive another part to power .This was 8-9 years ago and no problems .I also power the gage lights with the ash tray light wire .

08-16-2009, 04:12 PM	#8
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I removed that unit and found a switched wire in the back that was a big gage.I ran several small wires from the connector out several inches and put fuseholders on each .I replace the unit and used the wires to power several things as needed .There may be one or two ready to receive another part to power .This was 8-9 years ago and no problems .I also power the gage lights with the ash tray light wire .