Anyone know how to eliminate PS side airbag from circuit?

dudemaaan · 09-08-2009, 02:36 PM

If you don't need either bag then you can just unplug the module on the driverside footwell, its above your right foot if sitting in the seat. Black module with yellow sticker and 2 plugs going into it.

If you need the passenger or driver bag then anything from a 10 ohm to 330 ohm resistor should work on whichever side is deleted. A bulb would work too since it adds resistance to the system, but resistors would be easier to work with.

If you just take the airbag diagnostic bulb out, then you will get several beeps instead.

09-08-2009, 02:36 PM	#4
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	If you don't need either bag then you can just unplug the module on the driverside footwell, its above your right foot if sitting in the seat. Black module with yellow sticker and 2 plugs going into it. If you need the passenger or driver bag then anything from a 10 ohm to 330 ohm resistor should work on whichever side is deleted. A bulb would work too since it adds resistance to the system, but resistors would be easier to work with. If you just take the airbag diagnostic bulb out, then you will get several beeps instead. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!