auxiliary injection-who here has it?

dudemaaan · 09-29-2009, 01:57 AM

Yeah if you were using the TPS it uses injector duty. The downside to that, is it appears you would never get full flow from the nozzle unless your injector duty was at 100 percent duty. Since 100% of say 80% duty is still only 80%. Plus that's kind of confusing to think of it being a percent of a percent, in that case you might as well just put 100 everywhere and let the injector duty control the amount of water being injected.

09-29-2009, 01:57 AM	#21
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	Yeah if you were using the TPS it uses injector duty. The downside to that, is it appears you would never get full flow from the nozzle unless your injector duty was at 100 percent duty. Since 100% of say 80% duty is still only 80%. Plus that's kind of confusing to think of it being a percent of a percent, in that case you might as well just put 100 everywhere and let the injector duty control the amount of water being injected. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!