small bridge 12a/stock nikki

RotaryProphet · 01-06-2010, 08:35 AM

The bridge isn't going to increase flow very much on the intake side (generally the bridge is a last step after opening the ports up as much as possible), but it is going to move the intake open -way- forward, and without a completely open exhaust to keep backpressure to ~zero, it's going to ruin driveability pretty much everywhere. He'd be much much better off with a street port, as even a very large street port will handle these conditions better than a stock/bridge combination, and the stock nikki could be modified to run it very well.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-06-2010, 08:35 AM	#2
RotaryProphet Rotary Fanatic Join Date: Sep 2008 Posts: 147 Rep Power: 17	The bridge isn't going to increase flow very much on the intake side (generally the bridge is a last step after opening the ports up as much as possible), but it is going to move the intake open -way- forward, and without a completely open exhaust to keep backpressure to ~zero, it's going to ruin driveability pretty much everywhere. He'd be much much better off with a street port, as even a very large street port will handle these conditions better than a stock/bridge combination, and the stock nikki could be modified to run it very well.