cooling issue....custom car

craig3x · 02-25-2010, 05:44 PM

hope this helps. And given your somewhat complicated system I wouldn't be surprised if you have air in your system. There is a special coolant burping funnel that is supposed to work well for this. I would try to burp your system over several days to insure no air is in there.[/QUOTE]

you're right. I did have air in it from a previous boil over. I filled it on the side of the road, but didn't "burp" it. Thanks. However, I still think I may have a problem by trying to use a stock waterpump to push coolant through about 12 ft of hoses

02-25-2010, 05:44 PM	#27
craig3x Rotary Fan in Training Join Date: Feb 2010 Posts: 37 Rep Power: 0	hope this helps. And given your somewhat complicated system I wouldn't be surprised if you have air in your system. There is a special coolant burping funnel that is supposed to work well for this. I would try to burp your system over several days to insure no air is in there.[/QUOTE] you're right. I did have air in it from a previous boil over. I filled it on the side of the road, but didn't "burp" it. Thanks. However, I still think I may have a problem by trying to use a stock waterpump to push coolant through about 12 ft of hoses __________________ 74 porsche 914 with 13b rotary http://www.youtube.com/watch?v=d0CUlLecxbo 73 914 porsche 1.7

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode