weber help? please watch this

craig3x · 02-27-2010, 04:26 PM

Weber 48 IDA on lighlty ported (4-port, early 13b). Can't figure this out. had 250 mains and 70 idle jets. The car ran pretty good except for cruising. It would sputter alot. And on deceleration, it seemed to "load up" cuz coming out of deceleration and stepping on the throttle, it would just die out....much like the in the video. Got advice that my mains were too big, so I swapped them for 220 mains. Now it's worse and I can't even drive it. Also swapped in 60 idle jets. Please watch the video and see what you think. Thanks for any help!
http://www.youtube.com/watch?v=zUjz0AXzp0Q

02-27-2010, 04:26 PM	#1
craig3x Rotary Fan in Training Join Date: Feb 2010 Posts: 37 Rep Power: 0	weber help? please watch this Weber 48 IDA on lighlty ported (4-port, early 13b). Can't figure this out. had 250 mains and 70 idle jets. The car ran pretty good except for cruising. It would sputter alot. And on deceleration, it seemed to "load up" cuz coming out of deceleration and stepping on the throttle, it would just die out....much like the in the video. Got advice that my mains were too big, so I swapped them for 220 mains. Now it's worse and I can't even drive it. Also swapped in 60 idle jets. Please watch the video and see what you think. Thanks for any help! http://www.youtube.com/watch?v=zUjz0AXzp0Q __________________ 74 porsche 914 with 13b rotary http://www.youtube.com/watch?v=d0CUlLecxbo 73 914 porsche 1.7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode