Jerry's RX-7 Turbo II restoration

JerryLH3 · 06-11-2010, 08:21 PM

The collection of new parts is quite large at this point. I started stockpiling these a couple years ago in anticipation of one day needing to tear this car apart.

The interior was finally completely stripped as of a week or so ago.

A pretty big problem area that I had known about. I believe it was caused by a clogged hatch drain that would spill water into the emergency jack area. I've done a fair amount of stabbing at it with a screwdriver and it appears to be just really bad surface rust.

06-11-2010, 08:21 PM	#4
JerryLH3 Rotary Fan in Training Join Date: Jun 2010 Location: Tampa, FL Posts: 40 Rep Power: 0	The collection of new parts is quite large at this point. I started stockpiling these a couple years ago in anticipation of one day needing to tear this car apart. The interior was finally completely stripped as of a week or so ago. A pretty big problem area that I had known about. I believe it was caused by a clogged hatch drain that would spill water into the emergency jack area. I've done a fair amount of stabbing at it with a screwdriver and it appears to be just really bad surface rust. __________________ Jerry 1991 Mazda RX-7 Turbo - the current project/money pit

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode