GI: 1990 Base part out

WE3RX7 · 06-16-2010, 08:52 AM

Ok, as some may know I was on a quest to allocate a complete black interior in the best shape as possible to the point where I was willing to buy an entire complete car just to get it. Well, that happened.

Now, I really have no need for the rest of the car however, I'm contemplating fixing it up, tossing an older interior in it and driving it or parting it out. I wanted to see if there was enough interest in the parts from the car to sell.

Basically, I'm selling a complete car minus the interior. It has a complete motor, trans, body, etc.

The car has 189K miles on it (will check the compression of the engine this weekend), the passenger door and passenger fender were damaged in storage years ago, so they are no good and its missing its passenger mirror. Other than that, you name it - its got it. Engine, rear, trans, hood, tails, headlights, wiring harness, fuel tank, suspension, brakes (5 lug of course), etc.

Let me know if you're interested in any of it. I'll get pics up tomorrow and more details this weekend. I'll sell the entire car w/out the interior for $500obo.

This is just to GI, if I decide to sell parts individually, I'll toss together a new thread...

WE3RX7 · 06-17-2010, 08:46 PM

Here are some pics.

Here's the damage:

LunchboxCritter · 06-26-2010, 10:43 AM

I need the ac line that goes from the compressor to the front, it's shaped like the letter J at the compressor end and goes to the front of the car.

***TitaniumTT*** · 06-26-2010, 11:03 AM

Price on the light brown anti-roll device?

mazdadude7 · 06-26-2010, 12:15 PM

You wouldnt happen to have the hazard surround, and passenger dash vent triangle thing would you as well as a set of rear speaker covers? I also need ftp lenses. I know u said u didnt have interior but I thought maybe you had some parts... Let me know thanks

***TitaniumTT*** · 06-26-2010, 05:32 PM

In all seriousness the wiper switch nd possibly passenger headlight motor

13angryB's · 06-27-2010, 04:45 AM

If you part it out,
I'd want the P/S loop line & fittings,

vex · 06-27-2010, 09:50 AM

Engine, and possibly drivers side headlight motor relay (and/or motor). I should stop by sometime to see what I can snag

...

firzen · 06-27-2010, 09:55 PM

The red mud guards at the back of the wheel wells. Would these be available?

Thanks.

vex · 06-27-2010, 10:07 PM

Also may want one of the tails (I'm thinking the passenger side one)...

I may also want the power window switches and maybe a power window motor

need RX7 · 07-06-2010, 01:33 PM

What would pricing on the complete 5-lug swap be like?

Also possibly interested in brake master cylinder, clutch master cylinder and clutch slave cylinder.

WE3RX7 · 08-20-2010, 04:17 PM

Whoah... I'm a terrible seller, lol... I honestly forgot this thread was here!!

I actually am selling the car as a whole car at this point. Interior and all. I'd prefer not parting it out as I simply don't have the time. If it doesn't sell as a whole ride, I may just repair it over the winter or part it out next spring. Sorry guys!!

DNO · 04-02-2015, 09:23 PM

I want that driverside door & fender mon

rx7 vinnie · 04-02-2015, 09:36 PM

If you've been living under a rock that's ok but This thread is five years old....

06-16-2010, 08:52 AM	#1
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	GI: 1990 Base part out Ok, as some may know I was on a quest to allocate a complete black interior in the best shape as possible to the point where I was willing to buy an entire complete car just to get it. Well, that happened. Now, I really have no need for the rest of the car however, I'm contemplating fixing it up, tossing an older interior in it and driving it or parting it out. I wanted to see if there was enough interest in the parts from the car to sell. Basically, I'm selling a complete car minus the interior. It has a complete motor, trans, body, etc. The car has 189K miles on it (will check the compression of the engine this weekend), the passenger door and passenger fender were damaged in storage years ago, so they are no good and its missing its passenger mirror. Other than that, you name it - its got it. Engine, rear, trans, hood, tails, headlights, wiring harness, fuel tank, suspension, brakes (5 lug of course), etc. Let me know if you're interested in any of it. I'll get pics up tomorrow and more details this weekend. I'll sell the entire car w/out the interior for $500obo. This is just to GI, if I decide to sell parts individually, I'll toss together a new thread...

06-26-2010, 10:43 AM	#3
LunchboxCritter Simply Rotarded Join Date: Jan 2009 Location: Florida Posts: 166 Rep Power: 17	I need the ac line that goes from the compressor to the front, it's shaped like the letter J at the compressor end and goes to the front of the car. __________________ LunchboxCritter - 91 NA to J-Spec TII - 88 FC Vert - 04 Rx8 Disclaimer: I am not a mechanic, and I did not sleep at a Holiday Inn. DO NOT TRY THIS AT HOME!!!

06-26-2010, 11:03 AM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Price on the light brown anti-roll device? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-26-2010, 05:32 PM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	In all seriousness the wiper switch nd possibly passenger headlight motor __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-27-2010, 04:45 AM	#7
13angryB's The Newbie Join Date: Jun 2010 Location: Anchorage, Alaska Posts: 12 Rep Power: 0	If you part it out, I'd want the P/S loop line & fittings, __________________ 90 GTU TII swap, BNR stage 2, FMIC, Microtech

06-17-2010, 08:46 PM	#2
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Here are some pics. Here's the damage:

06-26-2010, 12:15 PM	#5
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	You wouldnt happen to have the hazard surround, and passenger dash vent triangle thing would you as well as a set of rear speaker covers? I also need ftp lenses. I know u said u didnt have interior but I thought maybe you had some parts... Let me know thanks

06-27-2010, 09:50 AM	#8
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	Engine, and possibly drivers side headlight motor relay (and/or motor). I should stop by sometime to see what I can snag ... __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

06-27-2010, 09:55 PM	#9
firzen Rotary Fanatic Join Date: Mar 2008 Posts: 231 Rep Power: 18	The red mud guards at the back of the wheel wells. Would these be available? Thanks.

06-27-2010, 10:07 PM	#10
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	Also may want one of the tails (I'm thinking the passenger side one)... I may also want the power window switches and maybe a power window motor __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

07-06-2010, 01:33 PM	#11
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	What would pricing on the complete 5-lug swap be like? Also possibly interested in brake master cylinder, clutch master cylinder and clutch slave cylinder. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress. Last edited by need RX7; 07-06-2010 at 01:41 PM.

08-20-2010, 04:17 PM	#12
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Whoah... I'm a terrible seller, lol... I honestly forgot this thread was here!! I actually am selling the car as a whole car at this point. Interior and all. I'd prefer not parting it out as I simply don't have the time. If it doesn't sell as a whole ride, I may just repair it over the winter or part it out next spring. Sorry guys!!

04-02-2015, 09:23 PM	#13
DNO porno music producer Join Date: Dec 2011 Location: Topanga Canyon Posts: 6 Rep Power: 0	I want that driverside door & fender mon

04-02-2015, 09:36 PM	#14
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) Posts: 743 Rep Power: 18	If you've been living under a rock that's ok but This thread is five years old.... __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode