Sprint RE Harness

[C. Ludwig]

Originally Posted by Redshft

Thanks Chris. Seems like a reasonable price. Is that a from-scratch price, or does any stock harness stuff need to be supplied? (I do have complete S5 harness in a parts car.)
Either way, I'll have to start budgeting for that when I start rebuilding my spare motor, hopefully this winter.

Depends on what components you'll be using. With 2nd gen stuff we ask the customer to send in their CAS, TPS, and coils so that we can swap the stock connectors on those parts with new Deustch connectors. It's hard to obtain all the correct stock connectors and we like the idea of providing a new, high quality connector for each part to help eliminate possible failures. The Deustch connector is also readily available and very easy to work with in case there is ever a need to change one of the components. For 3rd gen components we have sources for most of the stock connectors so we can usually build those out from scratch.

Since you're working with a more proprietary setup we may not need you to send us anything. That would help avoid cross border expenses too.

The short answer to your question is that the price is all inclusive but you may or may not have to send us some pieces.