GI: Sparco Torino II Seats and Sliders (2)

FerociousP · 07-29-2010, 10:34 AM

so I guess these won't bolt directly (don't have both brackets for an FC)?

infernosg · 07-29-2010, 01:50 PM

Quote:

Originally Posted by FerociousP

so I guess these won't bolt directly (don't have both brackets for an FC)?

Nope, the seats will not bolt directly in (what seats do?). Now if you're asking if brackets are available, then yes there are some out there like Wedge Engineering ($110), Bride ($200+), etc. I however, do not have these, due to poor experience with the Wedge brackets in the past, and made my own bracket out of the stock sliders for the driver's seat. I attempted to do the same on the passenger side, but failed due to the assinine stock setup. So in order to bolt these into any RX-7 you would need to only supply the mounting brackets.

07-29-2010, 10:34 AM	#1
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	so I guess these won't bolt directly (don't have both brackets for an FC)? __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode