Plain Jane OEM nothing to see here rebuild

JustJeff · 10-09-2010, 02:35 AM

This is my first rebuild of any kind, so at least so far I'm keeping the rebuild OEM. Not doing any porting or other modifications. Though if I found some used FD stationary gears I'd do that and modify the e-shaft oil jets. I need to replace my stat gear bearings, so if I found some used FD gears in good shape I'd consider that modification

Apex seal corner broke on front rotor

It spun around a couple of times, took out the housing and rotor

Had a hard time getting pics of apex groove that got damaged

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

10-09-2010, 02:35 AM	#2
JustJeff RCC Contributor Join Date: Mar 2008 Posts: 505 Rep Power: 18	This is my first rebuild of any kind, so at least so far I'm keeping the rebuild OEM. Not doing any porting or other modifications. Though if I found some used FD stationary gears I'd do that and modify the e-shaft oil jets. I need to replace my stat gear bearings, so if I found some used FD gears in good shape I'd consider that modification Apex seal corner broke on front rotor It spun around a couple of times, took out the housing and rotor Had a hard time getting pics of apex groove that got damaged