|
|||||||
| Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc... |
|
|
Thread Tools | Display Modes |
|
|||||||
| Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc... |
|
|
Thread Tools | Display Modes |
12-12-2010, 09:56 PM
|
#2 | |
|
The fan hit the shit!
Join Date: Nov 2010
Location: ocala,fl
Posts: 152
Rep Power: 16  |
Unplug the fuel pump and the coils, take out the plugs and crank over to exspell any fuel. put some oil in the spark plug holes rotating the engine after you put about 10-15cc of oil in the hole so you get some oil onto all three faces. Do the same on both rotors. then put new plugs in and re-connect everything and start it up. Should work for!
Zack
__________________
87 TII= High comp 13b-re,S360,Link G4 RX  Quote:
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode