Goopy Performance resurfaced rotor housings,THEY WORK!!!

t_g_farrell · 12-20-2010, 12:27 PM

I'd like to hear from Goopy about the basic process they are doing to
achive this. Not that they have to give away any proprietary info, just
an outline of what they do to achieve this and what tech they use
to make it happen. Like, is this a grind down and then recoat with
some surface treatment or is it some sort of resleaving of the inner
surface.

TT said its just a machined surface. So if thats the case the housing to
rotor apex seal clearance increases. I expect this is why they recommend
their apex seals. How much typically does it increase I wonder?

12-20-2010, 12:27 PM	#10
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC Posts: 757 Rep Power: 0	I'd like to hear from Goopy about the basic process they are doing to achive this. Not that they have to give away any proprietary info, just an outline of what they do to achieve this and what tech they use to make it happen. Like, is this a grind down and then recoat with some surface treatment or is it some sort of resleaving of the inner surface. TT said its just a machined surface. So if thats the case the housing to rotor apex seal clearance increases. I expect this is why they recommend their apex seals. How much typically does it increase I wonder? __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode