Crimping vs. Soldering

[RETed]

I use a set of MSD crimpers with the replacable dies.
With the three other option die sets, you can handle 90% of the crimp connections out there.
These include insulated and non-insulated - "Duestch" / "AMP lug" / "AMP pin".
This MSD crimper is also ratcheting, which will not release until you hit the proper compression.
The crimp tool + optional 3 sets of dies should come out to under $200.
(The crimp tool already comes with the "spark plug wire" set of dies.


-Ted