Renesis questions

Dannobre · 01-14-2011, 08:08 PM

The only comercially available porting templates are from Racing Beat...they are conservative ports...but there isn't a ton of room for much more there

There are 3 intake valves...the SSV and VDI are easy to actuate.....they have electrical solenoids for triggers and use vacuum actuators to open and close

The APV is a bit more difficult..but I believe a lot of newer ECU's like Haltech etc can actuate them. They use a reversing +5V signal to open and close the motorized valve

Rotary Related · 01-14-2011, 08:17 PM

Thanks for the info on the templates. If I go that way I will check them out.

Now the throttle body.......something has to be done there for sure. Anybody ever opened one before?

01-14-2011, 08:17 PM	#2
Rotary Related Good stuff at low prices Join Date: Oct 2010 Location: TX Posts: 52 Rep Power: 16	Thanks for the info on the templates. If I go that way I will check them out. Now the throttle body.......something has to be done there for sure. Anybody ever opened one before? __________________ Visit us at: www.rotaryrelated.com or find us on facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-14-2011, 08:08 PM	#1
Dannobre Rotary Fan in Training Join Date: Oct 2008 Posts: 87 Rep Power: 18	The only comercially available porting templates are from Racing Beat...they are conservative ports...but there isn't a ton of room for much more there There are 3 intake valves...the SSV and VDI are easy to actuate.....they have electrical solenoids for triggers and use vacuum actuators to open and close The APV is a bit more difficult..but I believe a lot of newer ECU's like Haltech etc can actuate them. They use a reversing +5V signal to open and close the motorized valve