This F#*king horn!

Mazdabater · 01-16-2011, 03:11 AM

So got a long bit of wire and connected it to the GR wire that connects it to the horn and ran it back near the CPU so I could check continuity between it and the GR wire coming off the CPU plug and it has continuity. The GW wire measures 12v with a multi meter and when jumpered to the GR wire I get no horn. However when I jump the wire from the battery to the horn it works. The CPU also clicks. So it seems to me like nothing is wrong but I'm still getting no F'n Horn

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-16-2011, 03:11 AM	#2
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS Posts: 326 Rep Power: 16	So got a long bit of wire and connected it to the GR wire that connects it to the horn and ran it back near the CPU so I could check continuity between it and the GR wire coming off the CPU plug and it has continuity. The GW wire measures 12v with a multi meter and when jumpered to the GR wire I get no horn. However when I jump the wire from the battery to the horn it works. The CPU also clicks. So it seems to me like nothing is wrong but I'm still getting no F'n Horn