Help needed with a Thermo fan

RX MIDGET · 02-09-2011, 04:23 AM

Guys,
After talking to someone in the know, it was suggested the previous radiator may be running / switching the fan and have no gauge association. This was correct. There was a second sender (under the thermostat) driving the gauge. I put the newly purchased Autometer sender under the thermostat and returned the old sender to the radiator. The single line to the fan was power, not gauge. Presto, problem solved, so thanks guys...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-09-2011, 04:23 AM	#4
RX MIDGET MG rocket Join Date: Oct 2010 Location: Victoria Australia Posts: 40 Rep Power: 0	Guys, After talking to someone in the know, it was suggested the previous radiator may be running / switching the fan and have no gauge association. This was correct. There was a second sender (under the thermostat) driving the gauge. I put the newly purchased Autometer sender under the thermostat and returned the old sender to the radiator. The single line to the fan was power, not gauge. Presto, problem solved, so thanks guys...