RX-8 20B subframe

To_Slow · 02-23-2011, 08:54 AM

There wont be any shop that will offer a subframe for a 20b/rx8.. Many shops just built there own. its mostly a hack job of the existing frame and custom motor mounts.

The best way to approach this is to change the steering rack to a custom manual rack it will def make the install much easier.....

If you have fab skills/tig welding.... you can do it.

If it all fails..
Chipsmotorsports can hook it up...

Thanks

02-23-2011, 08:54 AM	#1
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. Posts: 315 Rep Power: 18	There wont be any shop that will offer a subframe for a 20b/rx8.. Many shops just built there own. its mostly a hack job of the existing frame and custom motor mounts. The best way to approach this is to change the steering rack to a custom manual rack it will def make the install much easier..... If you have fab skills/tig welding.... you can do it. If it all fails.. Chipsmotorsports can hook it up... Thanks __________________ My link

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode