Widebands

[RICE RACING]

Innovate is a toy nothing more,

Put it in your dump pipe and you can count how long it will last in seconds.

Real pro's use NTK, everything else is junk, pure and simple.

The ONLY Bosch sensor that is acceptable on a rotary is the good old LSM-11 (which wsa originally designed for coal combustion furnaces) they are bullit proof and the most durable sensor around.

[Rotary Evolution]

Originally Posted by RICE RACING

Innovate is a toy nothing more,

Put it in your dump pipe and you can count how long it will last in seconds.

Real pro's use NTK, everything else is junk, pure and simple.

The ONLY Bosch sensor that is acceptable on a rotary is the good old LSM-11 (which wsa originally designed for coal combustion furnaces) they are bullit proof and the most durable sensor around.

i thought i did mention my TE is using a NTK... my bad.

Originally Posted by Rotary Evolution

my Techedge with it's stock NTK sensor is about 10 years old and has tuned over 100 cars and has about 60k miles on it and still works perfectly.

perhaps they have gone down in quality over the years? this unit is obviously older due to my comment. not that it matters, you are obviously biased anyways and not worthy of responding to a real discussion.

[RICE RACING]

Tech Edge never had any quality to start with

When I took my Autronic meter to his house! when I picked it up I foudn they had pulled it apart in a desperate attempt to reverse engineer the electronics cause they were too stupid to understand how Autronic make a LSM-11 sensor work.

Of ever funnier magnitiude was his demonstration of how it did not wark cause it would not respond to light fluid gas test lol. Then he went on to say when they trialed my meter on their factory test car( Ford Pinto!) compared to their TE unit "wideband" it was over one AFR out ! TE is a arse fest of a house based "company" always has been always will be. Over the years many shops have trialed his hack units and all have given them back to him after numerous problems running them where other units of reputable brands never ever had an issue.

I am sure he still operates his half arsed "home business" form his house in Canberra and his brothers house in his "American office" LOL. what a fuck burger!

[My5ABaby]

Originally Posted by RICE RACING

Innovate is a toy nothing more,

Put it in your dump pipe and you can count how long it will last in seconds.

Real pro's use NTK, everything else is junk, pure and simple.

The ONLY Bosch sensor that is acceptable on a rotary is the good old LSM-11 (which wsa originally designed for coal combustion furnaces) they are bullit proof and the most durable sensor around.

Although I did open up the discussion to all widebands, maybe we can say ones that are affordable for 95% of the board. However, if someday I get the money to go all out, I will definitely consider the Neko.