My RX7SP build up - Rotary Car Club

		Rotary Car Club > Tech Discussion > Show your rotary car build up.
My RX7SP build up

Mark Forums Read

Show your rotary car build up. Show off your Rotary Car build!

RICE RACING My RX7SP build up 02-13-2010, 07:33 PM

RICE RACING Here is "finished" engine bay... 02-13-2010, 07:35 PM

RICE RACING I have a ram air sealed air... 02-13-2010, 07:37 PM

RICE RACING Bitches love fisting 02-13-2010, 07:39 PM

RICE RACING Here is the Kerb Weight of my... 02-13-2010, 07:48 PM

RICE RACING This may be of interest to... 02-13-2010, 07:52 PM

05rex8 impressive! 02-13-2010, 08:42 PM

djmtsu Wow! 02-14-2010, 09:47 AM

sk8world "very" nice work!!!!!!! ... 02-14-2010, 08:24 PM

RICE RACING Thanks for the nice words,... 02-14-2010, 08:42 PM

scotty305 Great thread and nice photos.... 02-15-2010, 02:22 AM

RICE RACING Turbine inlet and Turbine... 02-15-2010, 03:14 AM

RICE RACING Bitches love fisting 02-15-2010, 03:31 AM

Herblenny Impressive.. I am... 02-15-2010, 09:38 AM

RICE RACING Overall? I wanted single... 02-15-2010, 03:37 PM

sk8world Phil, Not sure if you are... 02-15-2010, 02:57 PM

Force13b All these great projects... 02-15-2010, 05:37 PM

EJayCe996 I spy jizz on the ohlins!... 02-15-2010, 05:43 PM

Herblenny Peter Thanks for the info. ... 02-15-2010, 05:51 PM

RICE RACING That's ok its only the first... 02-15-2010, 06:03 PM

dudemaaan As always very nice work... 02-15-2010, 07:00 PM

RICE RACING Tested the compression of the... 02-16-2010, 09:09 PM

Gabriel82 wow my eyes hurt from the bad... 02-19-2010, 05:45 PM

sk8world So am I wrong or isnt this... 02-26-2010, 01:08 AM

Barry Bordes Peter, Your setup is the... 05-31-2010, 09:40 AM

RICE RACING Been a while since I have... 06-04-2010, 05:40 AM

RICE RACING Here is one graph, I think I... 06-04-2010, 06:07 AM

lh6601 Oh god yes. 05-31-2010, 06:10 PM

Barry Bordes Peter from your data the... 06-05-2010, 07:31 AM

RICE RACING Hi Mate, I have done allot... 06-05-2010, 07:29 PM

Barry Bordes Peter, thanks for the links.... 06-07-2010, 08:33 AM

RICE RACING Thanks Barry, I am looking... 06-07-2010, 07:39 PM

RICE RACING Action shot ... 06-14-2010, 08:02 AM

RICE RACING Just finished a major (for... 11-01-2010, 04:28 AM

RICE RACING Drove her today :) its... 11-02-2010, 01:13 AM

Mazdabater She is a gorgeous car rice. ... 06-11-2010, 08:33 PM

project86 VERY NICE BUILD! Pics are... 06-11-2010, 09:55 PM

RICE RACING Thanks everyone :001_005: ... 06-12-2010, 12:53 AM

JerryLH3 The craftsmanship on your car... 06-13-2010, 04:03 PM

Max777 car aside.... damascus... 06-19-2010, 12:34 PM

RICE RACING Yes mate, full damascus... 06-19-2010, 08:07 PM

RICE RACING Been a while since I posted... 10-09-2010, 04:13 PM

Herblenny COOL! Can't wait to see some... 10-10-2010, 10:46 PM

RICE RACING Want to show the true... 10-11-2010, 01:50 AM

benlewisMAV Nice knives! :D oh and the FD... 10-11-2010, 05:13 AM

Herblenny Very nice!! 11-02-2010, 02:43 AM

RICE RACING Thanks mate :) I also put... 11-05-2010, 05:08 AM

RICE RACING Here is some preliminary... 11-06-2010, 04:15 AM

RICE RACING I have a fair bit of... 11-06-2010, 11:59 PM

RICE RACING Polished the bad boy today,... 11-14-2010, 10:35 AM

RICE RACING Well :) Fitted up the new... 12-02-2010, 05:25 AM

More replies below current depth...

RICE RACING Thanks, good to see some... 12-04-2010, 08:50 PM

TitaniumTT A few things here... first,... 11-06-2010, 06:03 AM

RICE RACING After consulting with BDC and... 11-06-2010, 06:23 AM

RICE RACING More "box" for you... 11-06-2010, 06:42 AM

NoDOHC How level does the surface... 12-05-2010, 12:21 AM

RICE RACING The level makes no difference... 12-05-2010, 12:50 AM

RICE RACING got milk! 12-06-2010, 05:41 AM

RICE RACING I have edited video showing... 12-06-2010, 06:39 AM

RICE RACING http://www.youtube.com/watch?v... 12-06-2010, 08:37 AM

RICE RACING :conehead: Here is the graph... 12-10-2010, 08:36 PM

More replies below current depth...

RICE RACING New record for my little cat... 12-17-2010, 10:36 PM

RICE RACING http://www.youtube.com/watch?v... 12-18-2010, 01:59 AM

Trout2 You tube says you're video is... 12-11-2010, 05:21 PM

NoDOHC Wow! Emissions legal. Your... 12-12-2010, 01:18 AM

RICE RACING Thanks man, I worked very... 12-13-2010, 01:44 AM

NoDOHC That is a fact. It may cost... 12-13-2010, 09:49 PM

FC3S Murray Nice video man! So if my math... 12-21-2010, 01:59 PM

RICE RACING Thanks very much. On the... 12-21-2010, 06:02 PM

RICE RACING I have been into rotaries... 12-22-2010, 03:13 AM

RICE RACING No you see why I have very... 12-22-2010, 08:08 PM

diabolical1 well done, man. what you... 01-03-2011, 01:58 AM

RICE RACING Well said :hurray: :iagree: ... 01-03-2011, 03:23 AM

RICE RACING RICESP does 8500rpm limiter... 12-28-2010, 05:59 PM

TitaniumTT No, your shit blew up becuase... 12-28-2010, 06:44 PM

RICE RACING ^ Have to say I agree,... 12-30-2010, 05:18 PM

RICE RACING Well have had an unreal... 01-01-2011, 05:43 PM

FC3S Murray :toetap05: ...the wound is... 01-05-2011, 11:18 PM

EJayCe996 Congrats on being a feature... 01-06-2011, 02:38 PM

More replies below current depth...

RICE RACING Done a bit more fine tuning... 01-02-2011, 09:12 PM

NoDOHC I agree whole-heartedly. 01-04-2011, 09:09 PM

Barry Bordes Peter, hope you fared OK with... 01-25-2011, 08:16 AM

RICE RACING R.I.P One dyno machine :88: 02-12-2011, 07:08 AM

ChaserAero Coming in way late but the... 01-25-2011, 09:53 AM

RICE RACING Hey boys :biggthumpup: No... 01-25-2011, 05:19 PM

rdgt99 Very impressive build. ... 01-26-2011, 01:16 AM

RICE RACING My New dash board :fawk: ... 01-26-2011, 05:38 AM

TitaniumTT 72.5 psi Note to... 01-26-2011, 08:24 AM

RICE RACING 58psi "gauge pressure" as all... 01-26-2011, 08:38 AM

calicrewchief http://www.youtube.com/watch?v... 01-26-2011, 11:29 PM

RICE RACING More development and fine... 02-05-2011, 11:43 PM

RICE RACING Show update: The dyno was... 02-12-2011, 04:52 AM

rdgt99 Very impressive stuff!! ... 02-12-2011, 08:54 AM

RICE RACING Thanks :) The next stage... 02-12-2011, 05:35 PM

RICE RACING Compression measure on... 02-20-2011, 04:09 AM

RICE RACING Here is pics of the RR COP CD... 03-05-2011, 01:02 AM

More replies below current depth...

RICE RACING To give this comparison test... 03-18-2011, 05:46 PM

Mazdabater http://cgi.ebay.com.au/FD3S-RX... 03-24-2011, 04:24 AM

RICE RACING Sounds like a total fucken... 03-24-2011, 06:07 PM

Mazdabater GET FUCKED WHY DON'T I HAVE... 03-24-2011, 04:29 AM

RICE RACING Still a nice car for a... 03-24-2011, 06:09 PM

RICE RACING BACK ON TOPIC! Here is the... 03-24-2011, 06:10 PM

RICE RACING I just found 2 original... 03-24-2011, 06:16 PM

diabolical1 the F40 (in my opinion) is... 03-26-2011, 03:45 AM

RICE RACING Agreed, I grew up idolizing... 03-26-2011, 03:56 AM

Mazdabater You been on ausrotary lately... 03-26-2011, 07:43 PM

RICE RACING I know every SP in the... 03-26-2011, 07:57 PM

RICE RACING Got Wing ! ... 04-17-2011, 04:35 AM

RICE RACING Current engine bay set up... 04-17-2011, 04:45 AM

project86 I love your FD man. Loads of... 04-17-2011, 11:20 AM

RICE RACING Daily is a new FJ Cruiser :)... 04-17-2011, 04:30 PM

project86 Well its definitely an... 04-17-2011, 08:45 PM

RICE RACING Get On It POOFTERS :-oc==3 04-24-2011, 09:09 PM

Mazdabater Lol just push it higher till... 04-25-2011, 01:55 AM

RICE RACING The package I have made in... 04-25-2011, 02:57 AM

Mazdabater Come on rice 50psi pump fuel.... 04-25-2011, 03:34 AM

RICE RACING ^ This cars limit is ~36psi,... 04-25-2011, 03:42 AM

RICE RACING The performance is but one... 04-25-2011, 03:56 AM

MaD^94Rx7 I like the way you approach... 04-25-2011, 06:10 AM

RICE RACING I learned long ago that there... 04-25-2011, 06:20 AM

MaD^94Rx7 Awesome stuff! 04-25-2011, 06:56 AM

RICE RACING It's the best advertising... 04-25-2011, 06:44 PM

classicauto You're running NRS ceramics... 04-26-2011, 01:03 PM

RICE RACING ^ No and No. ^ The engine... 04-26-2011, 04:07 PM

project86 So all of your performance... 04-26-2011, 05:03 PM

RICE RACING Real Power, see the VBOX... 04-26-2011, 06:14 PM

More replies below current depth...

project86 Well then :) Maybe ill... 04-27-2011, 07:11 AM

RICE RACING I have no shortage of ca$h or... 04-27-2011, 07:23 AM

MaD^94Rx7 Correct me if I'm wrong Pete... 04-27-2011, 10:37 AM

RICE RACING I run BOTH. During the... 04-27-2011, 03:59 PM

project86 Are you Ohlins coilovers... 04-29-2011, 08:41 AM

classicauto I'm surprised to hear that... 04-29-2011, 10:10 AM

RICE RACING The Ohlins are a beautiful... 04-29-2011, 04:35 PM

RICE RACING No one has gone to the extent... 04-29-2011, 04:55 PM

Mazdabater What spark plugs are you... 04-29-2011, 06:00 PM

RICE RACING I still use the Trust... 04-29-2011, 06:13 PM

Mazdabater No you won't you'll post it... 04-29-2011, 06:26 PM

RICE RACING I know its hard to tell over... 04-29-2011, 07:08 PM

RICE RACING LOL Dyson here run buses LOL,... 09-24-2011, 05:39 PM

RICE RACING Some more pics of my ride ;)... 12-04-2011, 01:24 AM

project86 for some reason i thought... 04-29-2011, 07:13 PM

RICE RACING Seals start another thread... 04-30-2011, 12:35 AM

Mazdabater I'm sold then. Now just... 04-29-2011, 08:07 PM

Flash You have quite the nice ride.... 04-30-2011, 02:02 PM

RICE RACING Thanks :) Fuel system is... 04-30-2011, 11:24 PM

RICE RACING Testing on going ! 06-13-2011, 12:45 AM

RICE RACING Well the best just keeps... 09-23-2011, 07:13 PM

RICE RACING Changed this fuel system set... 09-23-2011, 07:23 PM

MaD^94Rx7 Hey Pete watchin this and... 09-24-2011, 02:50 AM

Mazdabater Cmon rice don't tease me,... 09-24-2011, 11:24 AM

RICE RACING Soon brother soon :party: ... 09-24-2011, 05:35 PM

RICE RACING Get On It...... Fact V's... 12-05-2011, 11:35 PM

RICE RACING :party: Well got RICESP... 12-10-2011, 09:14 PM

RICE RACING "Got Grip C*nts" :auto: Ho Ho... 12-20-2011, 12:40 AM

MaczPayne Need vids! :) 12-12-2011, 03:54 PM

knonfs INDEED! Peter - Are you... 12-12-2011, 05:04 PM

RICE RACING Hey there, No I use and... 12-12-2011, 05:57 PM

knonfs Love to hear that, seems like... 12-12-2011, 06:55 PM

More replies below current depth...

JhnRX7 Nice! Now its time to do the... 12-20-2011, 08:24 AM

RICE RACING SP 1995 the Don! 12-20-2011, 05:13 PM

RICE RACING Here is a great series of... 12-21-2011, 05:48 PM

RICE RACING Anyway of enough talk of... 12-22-2011, 12:25 AM

RICE RACING Get on It :-0c==3 12-31-2011, 11:22 PM

Mazdabater Wtac machines aren't all just... 12-21-2011, 08:36 PM

RICE RACING The only thing incredible is... 12-21-2011, 09:59 PM

FC3S Murray Damn that youtube vid you... 12-22-2011, 05:58 PM

RICE RACING Get on It :-0c==3 12-22-2011, 06:27 PM

yzf-r1 Beautiful car - glad I found... 01-04-2012, 02:17 AM

JhnRX7 Rice, How do you like the... 01-08-2012, 12:43 PM

RICE RACING My car is a street car 100% ... 01-08-2012, 04:22 PM

yzf-r1 Isn't that 14 kg/mm (780... 01-08-2012, 05:36 PM

RICE RACING Sorry I was thinking boost... 01-08-2012, 09:50 PM

RICE RACING Here is some pics of the IC... 01-15-2012, 06:44 AM

RICE RACING Took the bad boy out today :)... 01-20-2012, 10:42 PM

More replies below current depth...

More replies below current depth...

More replies below current depth...

RICE RACING This is the standard RICE... 12-15-2012, 07:23 PM

RICE RACING Race Logic VBOX proven ;) ... 12-15-2012, 07:32 PM

Libor Peter, there is something I... 04-01-2012, 07:34 PM

RICE RACING I do my system for simplicity... 04-01-2012, 08:04 PM

Libor This goes hand in hand with... 04-02-2012, 11:14 AM

RICE RACING I doubt you will find any... 04-02-2012, 04:42 PM

More replies below current depth...

WE3RX7 So a 911 RS is still faster... 12-15-2012, 11:56 PM

RICE RACING And a Ford Pinto is about 3... 12-16-2012, 12:00 AM

RICE RACING As a funny side note: True... 12-16-2012, 12:25 AM

ROT8WA Would be nice to see... 04-19-2013, 12:02 PM

RICE RACING Do NOT confuse this for a... 04-19-2013, 07:31 PM

More replies below current depth...

RICE RACING The RX7SP dominated the full... 12-16-2012, 12:05 AM

Topgear Nice tubs Peter ;) borg all... 04-20-2013, 03:22 PM

RICE RACING It is a S400SX3-82 (1300+bhp... 04-20-2013, 11:42 PM

Topgear Sexy it's the next up from... 04-21-2013, 04:17 AM

RICE RACING correct :coolgleamA: :auto: 04-21-2013, 04:40 PM

Mutaku Such a beautiful car, great... 04-23-2013, 06:28 PM

RICE RACING Thanks mate, Yes it is... 04-24-2013, 10:36 PM

RICE RACING More detail pics of the UNIT!... 04-25-2013, 05:35 AM

chibikougan Kittay is not amused! Exactly... 04-25-2013, 05:52 PM

RICE RACING I wont do any BDC or HC style... 04-25-2013, 10:24 PM

MaczPayne ^lol 04-27-2013, 10:56 PM

TitaniumTT Hey Peter.... you will have... 05-11-2013, 07:42 AM

RICE RACING No problem Brian :coolgleamA:... 05-11-2013, 06:59 PM

RICE RACING This is an example of how to... 05-11-2013, 07:19 PM

JhnRX7 I am using the exact same... 05-29-2013, 11:24 AM

RICE RACING Yeah that is good to hear... 05-29-2013, 07:08 PM

RICE RACING Some better screen set ups... 10-09-2013, 06:50 AM

grantrx4 That's a good article to... 11-24-2013, 03:20 PM

Brad this car needs to enter... 05-29-2013, 09:47 AM

silverfdturbo6port Nice! Where do you get all... 10-09-2013, 07:50 PM

RICE RACING ^All over the place^, lots of... 10-09-2013, 08:32 PM

RedR1 SO, SO True!! about 10 years... 10-14-2013, 05:17 AM

RICE RACING I still have the habit like... 10-14-2013, 07:35 AM

silverfdturbo6port Makes sense. So its safe to... 10-09-2013, 08:45 PM

RICE RACING Have no idea who they are but... 10-14-2013, 04:21 AM

RICE RACING F1 will learn many things to... 11-25-2013, 02:31 AM

Mitchocalypse Hold on.. you wait until you... 11-25-2013, 03:38 AM

RICE RACING Almost there, but it's about... 11-25-2013, 04:48 AM

grantrx4 Fair play. Are you running... 11-25-2013, 04:52 PM

RICE RACING I use a custom made and RR... 11-26-2013, 05:41 AM

Fendamonky So no more t04z? 11-26-2013, 09:01 AM

grantrx4 Sounds very interesting So... 11-26-2013, 04:45 PM

RICE RACING Some dash configuration shots... 12-15-2013, 06:45 AM

RICE RACING These are new shots of the... 12-19-2013, 10:49 PM

kraftjason413 wow! I just looked through... 11-26-2013, 10:51 AM

RICE RACING Look up Mazda M2 1020 this is... 11-26-2013, 02:43 PM

Dannobre Nice new toys :) 12-20-2013, 09:39 AM

RICE RACING UyYY73VfJJQ&feature=youtu.be... 12-26-2013, 01:23 AM

Pete_89T2 I like the customizable... 12-26-2013, 07:06 AM

RICE RACING It's the BDC & HC fail safe... 12-27-2013, 01:15 AM

RICE RACING These are some of the pages I... 02-07-2014, 07:06 PM

jacobcartmill RICE, can you post some... 02-08-2014, 10:11 PM

RICE RACING It's Pectel CAN data stream... 02-09-2014, 05:17 AM

RICE RACING Some updates happening .... ... 12-03-2014, 12:52 AM

Fendamonky You must love your seafood... 12-03-2014, 10:14 AM

C. Ludwig http://essentialsofnutrition.f... 12-03-2014, 10:39 AM

speedjunkie ^Damn those look good haha. ... 12-03-2014, 10:58 AM

RICE RACING On the RICE RACING rotors: *... 12-03-2014, 04:33 PM

Fendamonky I believe scalloping the... 12-03-2014, 01:02 PM

C. Ludwig More duration without overlap. 12-03-2014, 01:34 PM

RICE RACING As stated its mostly done to... 12-03-2014, 04:49 PM

Prodigy That scalloped rotor is the... 12-03-2014, 09:30 PM

C. Ludwig I didn't take into account... 12-04-2014, 09:03 AM

RICE RACING Thanks, I will also have... 12-04-2014, 05:19 PM

Prodigy Did you modify the size/shape... 12-04-2014, 08:13 PM

RICE RACING YES, it is the only way to... 12-04-2014, 08:29 PM

RICE RACING YES, it is the only way to... 12-04-2014, 08:37 PM

speedjunkie OK thanks! 12-05-2014, 03:53 PM

Prodigy Hey Rice, links to the... 12-27-2014, 10:16 PM

RICE RACING Nup, fuck imageshack, no time... 12-28-2014, 04:04 AM

RICE RACING Fact from Fiction 12-31-2014, 06:30 AM

RICE RACING Fits like a finger in an anus... 12-31-2014, 06:49 AM

RICE RACING This is how far it hangs out,... 01-01-2015, 05:00 PM

chibikougan Ooooh:o16: 01-01-2015, 05:12 PM

RICE RACING Here is another view showing... 01-03-2015, 08:21 PM

Fendamonky Looks good Peter. If you need... 12-31-2014, 09:09 AM

speedjunkie Yeah I'm switching to the AEM... 12-31-2014, 06:48 PM

RICE RACING Drawing the c-u-n-t of a coil... 12-31-2014, 07:02 PM

Reclaimer Auto Nicccccce 12-31-2014, 10:52 PM

RICE RACING Finished this part of it, all... 12-31-2014, 11:24 PM

RICE RACING Almost done, quick model of... 01-01-2015, 03:10 AM

RICE RACING This is the final positioning... 01-01-2015, 05:15 AM

speedjunkie Damn. I've never even worked... 01-01-2015, 09:01 AM

RICE RACING Yes it is hard on the brain@!... 01-01-2015, 01:22 PM

dakar318 The way you say **** in every... 01-01-2015, 09:41 AM

RICE RACING Finished set up, I want the... 01-02-2015, 02:54 AM

chibikougan I do like that mount. Nice... 01-02-2015, 03:16 AM

RICE RACING The detail is in there, cant... 01-02-2015, 04:07 AM

RICE RACING Last pic....................... 01-02-2015, 04:10 AM

speedjunkie DAAAAAAAMN. Looks REALLY... 01-02-2015, 02:50 PM

Fendamonky Looks sexy Peter!!! Any... 01-02-2015, 04:37 PM

RICE RACING Thanks boys, in regards to... 01-03-2015, 01:22 AM

Slides Looks good. Will there be... 01-03-2015, 06:24 AM

RICE RACING I intentionally try to keep... 01-03-2015, 06:50 AM

speedjunkie I'll be taking my car to... 01-03-2015, 01:04 PM

RICE RACING Yeah, I'll be making it for... 01-03-2015, 08:12 PM

RICE RACING HALF NAZI spring installed... 01-03-2015, 11:23 PM

RICE RACING More optimization! :suspect:... 01-04-2015, 12:56 AM

RICE RACING Finished! now back to MS... 01-04-2015, 04:49 AM

speedjunkie Sweet! 01-04-2015, 04:09 PM

RICE RACING Thanks :302: I've done... 01-04-2015, 04:21 PM

speedjunkie I actually thought your... 01-04-2015, 10:41 PM

RICE RACING Advantages * zero power loss... 01-04-2015, 10:50 PM

speedjunkie Cool, to me it looks like all... 01-04-2015, 11:13 PM

RICE RACING COP Adaptor is finished with... 01-05-2015, 10:34 PM

RICE RACING Pretty much over this now... 01-05-2015, 10:49 PM

GySgtFrank That looks like a very nicely... 01-05-2015, 11:02 PM

RICE RACING Thanks man, smashed up a gay... 01-06-2015, 12:12 AM

RICE RACING Fuel Injector O-Ring for coil... 01-06-2015, 07:12 AM

RX SE7EN Looks great. Why are you... 01-06-2015, 09:19 AM

RICE RACING These popular coils will not... 01-06-2015, 01:54 PM

RICE RACING OK! I did a major redesign... 01-06-2015, 05:30 PM

Slides might try to swap my cars... 01-06-2015, 09:09 PM

Fendamonky Looks good Peter, I'm liking... 01-07-2015, 08:41 AM

RICE RACING Yeah its the best you can do... 01-07-2015, 09:29 AM

Fendamonky Meh, that's like getting a... 01-07-2015, 09:39 AM

speedjunkie Fully agree. No way I'd get... 01-07-2015, 12:47 PM

More replies below current depth...

Dannobre When do we get to play with a... 01-13-2015, 09:10 PM

RICE RACING very soon :) 01-13-2015, 09:32 PM

Dannobre Hurry up then.....I have a... 01-13-2015, 09:34 PM

RICE RACING .............. 01-13-2015, 10:13 PM

Dannobre Damn...1300HP 2... 01-13-2015, 11:22 PM

RICE RACING I also finished a version of... 01-14-2015, 06:56 PM

chibikougan Fine just take all my monies... 01-14-2015, 06:58 PM

RICE RACING RR bespoke design rubber... 01-16-2015, 11:43 PM

sa22c I will be mighty tempted on a... 01-22-2015, 06:15 AM

RICE RACING While I have not owned... 01-22-2015, 06:18 AM

sa22c When you say Race stuff made... 01-22-2015, 07:23 AM

RICE RACING Proflex mainly ride height... 01-22-2015, 07:57 AM

RICE RACING ........... 01-29-2015, 08:21 AM

RICE RACING ........... 01-31-2015, 10:57 PM

RICE RACING .............. 02-21-2015, 08:25 PM

RICE RACING Some more angles of the Don ... 03-20-2015, 04:32 AM

V8eter Very nice peter, presentation... 02-21-2015, 09:33 PM

RICE RACING Thanks, one thing is for sure... 02-24-2015, 08:03 AM

RICE RACING Some new porting to test... 03-14-2015, 01:25 PM

Topgear Great work peter I'm on... 03-15-2015, 02:33 PM

RICE RACING ............. 03-15-2015, 03:09 PM

Slides Obviously you are increasing... 03-16-2015, 12:26 AM

RICE RACING I am not sure how much... 03-16-2015, 01:16 AM

RICE RACING Just got a new clutch for the... 04-06-2015, 07:27 PM

chibikougan OOoooh what kind and why no... 04-06-2015, 08:12 PM

RICE RACING ATS 3 plate carbon, will take... 04-06-2015, 08:17 PM

chibikougan Oooh now I must have pics! 04-06-2015, 08:21 PM

RICE RACING someone say misfire? NOT... 04-10-2015, 01:11 AM

chibikougan Ship it! NAOW! 04-10-2015, 01:16 AM

Slides Is that the new one with both... 04-07-2015, 02:38 AM

RICE RACING No I got this semi carbon one... 04-07-2015, 03:20 AM

RICE RACING The 'un sprung' center is... 04-07-2015, 03:28 AM

RICE RACING My clutch turned up :) pretty... 04-09-2015, 02:49 AM

chibikougan MOTHER OF GOD!:drool5: 04-09-2015, 03:02 AM

Slides Interesting the way they have... 04-09-2015, 07:21 AM

RICE RACING Yeah it looks ok, just as a... 04-09-2015, 08:15 AM

RICE RACING Some c-u-n-t-s may find it... 04-09-2015, 08:22 AM

RICE RACING I engraved the clutch today... 04-10-2015, 02:52 AM

chibikougan That makes things a little... 04-10-2015, 03:23 AM

RICE RACING This is the way it should... 04-10-2015, 03:40 AM

chibikougan Yeah that should line them up... 04-10-2015, 03:51 AM

RICE RACING ............. 06-09-2015, 06:30 AM

RICE RACING ......... 06-15-2015, 02:27 AM

RICE RACING I engraved the clutch today... 04-10-2015, 02:51 AM

RICE RACING Clutch disks obviously are... 04-10-2015, 03:55 AM

chibikougan Seems like a no brainer to... 04-10-2015, 04:27 AM

Prev

Previous Post

Next Post

Next

03-24-2011, 04:29 AM	#10
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS Posts: 326 Rep Power: 16	GET FUCKED WHY DON'T I HAVE 33K ON ME RIGHT NOW http://cgi.ebay.com.au/Mazda-RX7-SP-...item27b9a6e292 Actually nevermind, I had a look at the pics then noticed it was a 92.

Bookmarks

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 05:53 PM.