Need replacement FPR?

RoughRex · 04-09-2011, 06:47 PM

Update, pump replaced... now getting 70 PSI with flow obstructed.

Still getting 0 PSI on return side.

The FPR is located on end of the secondary fuel rail where the fuel return should begin.

I am now getting a trickle of fuel out of the pressure relief valve on my tester when testing the return side... I think my original theory is still the problem, I just happened to catch the pump on its way out too.

04-09-2011, 06:47 PM	#12
RoughRex Out of Nickels and Dimes Join Date: Mar 2008 Location: Nashville, TN Posts: 192 Rep Power: 18	Update, pump replaced... now getting 70 PSI with flow obstructed. Still getting 0 PSI on return side. The FPR is located on end of the secondary fuel rail where the fuel return should begin. I am now getting a trickle of fuel out of the pressure relief valve on my tester when testing the return side... I think my original theory is still the problem, I just happened to catch the pump on its way out too. __________________ 1988 GXL

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode