Blitz boost controller and a bunch of engine parts

eyecandy · 03-31-2008, 08:05 PM

Pics can be found here http://s240.photobucket.com/albums/f...rts/?start=all

ENGINE:
Blitz DSBC Spec R (new never used) $290
Billet oil filter pedestals w/npt ports and hardware $65 each
JDM Vac block $60
3" V-band clamps $50 each
Primary Fuel rail w/injectors $60
Secondary Fuel rail w/injectors $70 (or both rails w/injectors for $110)
MOP $50
MOP oem lines $10 (or free with MOP)
Motor mounts w/good bushings (aluminum/steel) $100
Iron Set (front, intermediate, rear) $290 for the set or 110 ea
E-Shafts $60
Rear stationary gear $35
Oil pump w/chain $35 ea
Tension bolts $15 ea set
Tubular dowel rods $10 ea set
Water pump w/housing $70
Front counter weight $20 ea
Metering oil pump gear $10 ea
Oil pan pick up $10 ea
Oil pan $30 ea
Main pulley (oem) $10
Flywheel (oem, needs resurfaced) $20 ea

DRIVETRAIN:
Super*Now transmission cooling plate $220

BOOKS/MAGS: $15 each
RX7 magazines vol 7, 9

Let me know if you have any questions, I accept paypal. You can pm or email me at seeltuned@aol.com

The only thing off the top of my head I am looking for is a set of interior trim pieces. Condition does not matter just as long as they are not broken.

eyecandy · 04-02-2008, 08:17 PM

Blitz boost controller sold!

FreeLance · 04-04-2008, 03:39 PM

Can you do 65 shipped for the Oil pedestal? I'm in NY and believe you are also...

charlies7 · 04-04-2008, 05:03 PM

dam you lance.

Quote:

Originally Posted by FreeLance

Can you do 65 shipped for the Oil pedestal? I'm in NY and believe you are also...

eyecandy · 04-04-2008, 10:50 PM

I have a couple of them left, my paypal is the same as my email seeltuned@aol.com I am firm on pricing for the pedestals shipped would be $70.

eyecandy · 12-28-2008, 11:11 AM

Here is an update:

ENGINE:
Billet oil filter pedestals w/npt ports and hardware $65
JDM Vac block $60
Primary Fuel rail w/injectors $60
Secondary Fuel rail w/injectors $70 (or both rails w/injectors for $110)
MOP $50
MOP oem lines $10 (or free with MOP)
Rear stationary gear $35
Oil pump w/chain $35 ea
Tension bolts $15 ea set
Tubular dowel rods $10 ea set
Front counter weight $20 ea
Metering oil pump gear $10 ea
Oil pan pick up $10 ea
Main pulley (oem) $10

DRIVETRAIN:
Super*Now transmission cooling plate $220

03-31-2008, 08:05 PM	#1
eyecandy Rotary Fan in Training Join Date: Mar 2008 Posts: 89 Rep Power: 18	Blitz boost controller and a bunch of engine parts Pics can be found here http://s240.photobucket.com/albums/f...rts/?start=all ENGINE: Blitz DSBC Spec R (new never used) $290 Billet oil filter pedestals w/npt ports and hardware $65 each JDM Vac block $60 3" V-band clamps $50 each Primary Fuel rail w/injectors $60 Secondary Fuel rail w/injectors $70 (or both rails w/injectors for $110) MOP $50 MOP oem lines $10 (or free with MOP) Motor mounts w/good bushings (aluminum/steel) $100 Iron Set (front, intermediate, rear) $290 for the set or 110 ea E-Shafts $60 Rear stationary gear $35 Oil pump w/chain $35 ea Tension bolts $15 ea set Tubular dowel rods $10 ea set Water pump w/housing $70 Front counter weight $20 ea Metering oil pump gear $10 ea Oil pan pick up $10 ea Oil pan $30 ea Main pulley (oem) $10 Flywheel (oem, needs resurfaced) $20 ea DRIVETRAIN: Super*Now transmission cooling plate $220 BOOKS/MAGS: $15 each RX7 magazines vol 7, 9 Let me know if you have any questions, I accept paypal. You can pm or email me at seeltuned@aol.com The only thing off the top of my head I am looking for is a set of interior trim pieces. Condition does not matter just as long as they are not broken.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-02-2008, 08:17 PM	#2
eyecandy Rotary Fan in Training Join Date: Mar 2008 Posts: 89 Rep Power: 18	Blitz boost controller sold!

04-04-2008, 03:39 PM	#3
FreeLance The Newbie Join Date: Mar 2008 Location: New York Posts: 27 Rep Power: 0	Can you do 65 shipped for the Oil pedestal? I'm in NY and believe you are also...

04-04-2008, 10:50 PM	#5
eyecandy Rotary Fan in Training Join Date: Mar 2008 Posts: 89 Rep Power: 18	I have a couple of them left, my paypal is the same as my email seeltuned@aol.com I am firm on pricing for the pedestals shipped would be $70.

12-28-2008, 11:11 AM	#6
eyecandy Rotary Fan in Training Join Date: Mar 2008 Posts: 89 Rep Power: 18	Here is an update: ENGINE: Billet oil filter pedestals w/npt ports and hardware $65 JDM Vac block $60 Primary Fuel rail w/injectors $60 Secondary Fuel rail w/injectors $70 (or both rails w/injectors for $110) MOP $50 MOP oem lines $10 (or free with MOP) Rear stationary gear $35 Oil pump w/chain $35 ea Tension bolts $15 ea set Tubular dowel rods $10 ea set Front counter weight $20 ea Metering oil pump gear $10 ea Oil pan pick up $10 ea Main pulley (oem) $10 DRIVETRAIN: Super*Now transmission cooling plate $220