Twin Charged FD - Fraternal Twins

RX SE7EN · 04-14-2011, 09:29 PM

Huge updates coming, pulled an all nighter saturday, and got almost all of the piping done. The only piping left is the easy stuff (almost only straight pieces to go, and no more welding piping to cast aluminum)

Turbo also came in, it fits on the manifold just fine. Even more clearance than before. I just need to cut the 4bolt flange off the downpipe and weld on the V-band flange.

I'll also be coating the turbine housing with DEI high temp coating.

My belts came in today, we have tension

and I installed my Tweakit racing idler pulley for the water pump belt (I purchased it last year haha).

Pictures will come tonight.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-14-2011, 09:29 PM	#11
RX SE7EN Rotary Fanatic Join Date: Feb 2010 Posts: 183 Rep Power: 16	Huge updates coming, pulled an all nighter saturday, and got almost all of the piping done. The only piping left is the easy stuff (almost only straight pieces to go, and no more welding piping to cast aluminum) Turbo also came in, it fits on the manifold just fine. Even more clearance than before. I just need to cut the 4bolt flange off the downpipe and weld on the V-band flange. I'll also be coating the turbine housing with DEI high temp coating. My belts came in today, we have tension and I installed my Tweakit racing idler pulley for the water pump belt (I purchased it last year haha). Pictures will come tonight.