DGRR 2011 Winners

Rotorypolo · 05-04-2011, 10:26 PM

Rotorypolo 1973 RX-3
1st in class (old school/other rotaries) DGRR 2011

Mods
Here is everything in a nutshell:
Street port 13B 4 port, MSD Ignition coils and Jacobs amp, Holley 4 barrel carburetor, Holley fuel pump, Racing Beat intake manifold, Racing Beat downpipe, Racing Beat exhaust system. Custom built 5 speed TII transmission with gear changed out and shorten gearing. Custom race suspension with coilovers and 4 wheel disc brakes w/ cross drilled rotors. Everything under the hood is SS lines and AN fitting. Chassis was stiffened and reinforced. Wheels are ultra rare Advan Racing A3A. 13 x 8s. Interior is mostly stock with an RX-8 GT seat for the passenger side and an old school Sparco racing seat for the driver.

05-04-2011, 10:26 PM	#7
Rotorypolo Rotary Fanatic Join Date: Jul 2008 Location: ATL Posts: 116 Rep Power: 18	Rotorypolo 1973 RX-3 1st in class (old school/other rotaries) DGRR 2011 Mods Here is everything in a nutshell: Street port 13B 4 port, MSD Ignition coils and Jacobs amp, Holley 4 barrel carburetor, Holley fuel pump, Racing Beat intake manifold, Racing Beat downpipe, Racing Beat exhaust system. Custom built 5 speed TII transmission with gear changed out and shorten gearing. Custom race suspension with coilovers and 4 wheel disc brakes w/ cross drilled rotors. Everything under the hood is SS lines and AN fitting. Chassis was stiffened and reinforced. Wheels are ultra rare Advan Racing A3A. 13 x 8s. Interior is mostly stock with an RX-8 GT seat for the passenger side and an old school Sparco racing seat for the driver. __________________ 1994 RX-7 PEP - (SOLD) 1993 RX-7 R1 - (under the knife) 1973 RX-3 13b 5 speed (DGRR 2011- 1st in class)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode