DGRR 2012 To Do List

orion84gsl · 12-29-2011, 10:43 PM

On the FB:

Install RE-Speed TII brakes all around with 5x114.3 Moser axles.
Install new aluminum rad. Probably have to do some custom bracketry for this since it's thicker than the stocker so the fan will hit the front pulley and the fan won't fit in front because of the sway bar. A little FC style angle is in order.
(Maybe) Make aluminum inner door panels and redo front speaker pods.

Buy and install the following:
PERFECT wheels.
New tires.
New better seats.

Fender roll/corner balance/alignment
If money and time remains, new exhaust then dyno tune. If not then just dyno tune with the RB exhaust.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-29-2011, 10:43 PM	#11
orion84gsl Rotary Fanatic Join Date: Mar 2008 Posts: 167 Rep Power: 18	On the FB: Install RE-Speed TII brakes all around with 5x114.3 Moser axles. Install new aluminum rad. Probably have to do some custom bracketry for this since it's thicker than the stocker so the fan will hit the front pulley and the fan won't fit in front because of the sway bar. A little FC style angle is in order. (Maybe) Make aluminum inner door panels and redo front speaker pods. Buy and install the following: PERFECT wheels. New tires. New better seats. Fender roll/corner balance/alignment If money and time remains, new exhaust then dyno tune. If not then just dyno tune with the RB exhaust.