RA OMP adapter install on a S5 T2 writeup

beefhole · 01-15-2012, 10:33 AM

FWIW, using my aftermarket TD06 turbo, my oil return was done real easy. The stock flange on the front cover was simply cut leaving about 1.5 inches of tube. Then a small flare was made and I simply slipped a rubber return hose on it with a band clamp. Simple, dirt cheap and no leaks. It's fine that you had custom flanges and AN fittings done, but that's also expensive (compared to a rubber hose and clamp). However, I can understand if you didn't want to cut any stock pieces up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-15-2012, 10:33 AM	#1
beefhole Fired up! Join Date: Aug 2011 Location: Queens, NY Posts: 14 Rep Power: 0	FWIW, using my aftermarket TD06 turbo, my oil return was done real easy. The stock flange on the front cover was simply cut leaving about 1.5 inches of tube. Then a small flare was made and I simply slipped a rubber return hose on it with a band clamp. Simple, dirt cheap and no leaks. It's fine that you had custom flanges and AN fittings done, but that's also expensive (compared to a rubber hose and clamp). However, I can understand if you didn't want to cut any stock pieces up.