TEAM SR FB Rx-7 Rebuild

Rich@SR · 04-14-2012, 09:40 AM

Thanks everyone for the replies. So my build may have taken a turn last night...

I found this on one of the housings.

It's the gouge in the first picture that really worries me. So after talking with my buddy and team mate, I think I have decided to turn this into an IT7R/STU build using the 13B MSP. I'm going to be liquidating some of my spare parts that I won't need anymore to help offset the cost but I'll keep everyone posted. Any input from any of you is appreciated and welcome!!

04-14-2012, 09:40 AM	#8
Rich@SR SR Race Engineering Join Date: Jan 2012 Location: Loxahatchee, FL Posts: 81 Rep Power: 14	Thanks everyone for the replies. So my build may have taken a turn last night... I found this on one of the housings. It's the gouge in the first picture that really worries me. So after talking with my buddy and team mate, I think I have decided to turn this into an IT7R/STU build using the 13B MSP. I'm going to be liquidating some of my spare parts that I won't need anymore to help offset the cost but I'll keep everyone posted. Any input from any of you is appreciated and welcome!! __________________ SR Race Engineering... Home of the "SR Nikki" My 1st Gen SCCA Rebuild Thread 1985 Rx-7 (SCCA Racecar) 2004 Lexus IS300 (Daily) 2004 VW GTI (Wife's Daily/Toy) Last edited by Rich@SR; 04-16-2012 at 01:28 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode