SSM RX7 Build

[cturbo28]

I have started some new top secret projects moving some weight back and right. I am just now fitting everything up and seeing if things are going to fit all together. If anyone has any ideas or suggestions I would be glad to hear them as some times I over think things.

1. EPS

SW20 Electric PS pump moved to passenger side with battery and ABS.

2. EWP

Craig Davis electric water pump, hopefully this will be controlled via Haltech PWM output.

3. ALT relocation

Relocate Alternator to clear up some space up top and since I will be loosing my water pump pulley I thought I needed to relocate it. I would love to move it to the passenger side but packaging is a big issue on that side since the turbo and everything else is located there.

Also my new engine is on the bottom of the list. I pulled the new engine out and put the old motor back in after the Dyno results. I will update later on the outcome of the new motor set up when I hit the numbers I want. The last race I did was on the old motor not the new one.