infernosg's S5 N/A Build

[infernosg]

Originally Posted by beefhole

Use the location the stock computer (once) used. Where you have it should work as long as it doesn't interfere with the thermostat.

That's where I have it now - in the thermostat housing. It's the sensor in the foreground. The second sensor is for an independent water temperature gauge. The problem I have is my TPS connector is pointing straight at it so clearance is going to be tight.

[Pete_89T2]

Originally Posted by infernosg

That's where I have it now - in the thermostat housing. It's the sensor in the foreground. The second sensor is for an independent water temperature gauge. The problem I have is my TPS connector is pointing straight at it so clearance is going to be tight.

Just a thought - is it possible to install the TPS clocked so the connector is 180 degrees off from where it's pointed now? You'll probably need to rewire the TPS connector too, to ensure mechanical WOT position corresponds to what the TPS needs to output electrically.