Somewhat custom hood.

Boostmaniac · 04-19-2008, 05:22 PM

Is there any way a hood could be made that resembled a stock TII hood but had a NACA duct to vent air to the turbo? I want something like this but just cringe at the idea of cutting up my aluminum hood.

Thanks for the help guys!

-Maniac

JKL Racing Engineering · 04-20-2008, 12:40 AM

Yes, we can certainly do any part under two options:
1. We can custom produce the hood and duct for your specification but it will be very expensive.
2. We will need at least 15 people interested in this product then we can get a GB going.

Boostmaniac · 04-21-2008, 07:47 AM

How expensive is very expensive, ballpark figure.

Phoenix7 · 04-22-2008, 06:29 PM

How about a duct that WE can install on the hood? Saves you time and saves us $.

JKL Racing Engineering · 04-22-2008, 06:31 PM

Quote:

Originally Posted by Boostmaniac

How expensive is very expensive, ballpark figure.

Price for custom hood with custom ducting will be in the $1000-2000 range depending on actual amount of time and material involved in the production.

Quote:

Originally Posted by phoenix7

How about a duct that WE can install on the hood? Saves you time and saves us $.

Sure, as long as we get enough people interested in the same product, we will be able to make it happen.

Phoenix7 · 04-22-2008, 06:33 PM

should we talk dimensions and get some people interested?

Also, how likely are you to make the Panspeed hood? If you think it's something that you see happening in the future than I would go ahead and wait for it. Either way, we can still talk dimensions to see if interest increases.

JKL Racing Engineering · 04-22-2008, 06:58 PM

we would like to see it happen also but it totally depends on the amount of interests we get from the customers so you guys are in control here.

Iox106 · 04-23-2008, 10:12 AM

What would be the cost of the panspeed hood if we do have the inter?

Boostmaniac · 04-23-2008, 03:54 PM

Can someone link a pic of the Panspeed hood? It might already have what I am thinking about.

Phoenix7 · 04-23-2008, 07:22 PM

Juice · 04-24-2008, 07:33 PM

The Panspeed hood sucks. Don't make it.

MaczPayne · 04-24-2008, 09:39 PM

^Trying to preserve the rarity aren't we?

Phoenix7 · 04-24-2008, 09:41 PM

aja! Is that why the pics were removed? Those were of HIS car??

Is anyone interested in this GB?
http://www.rotarycarclub.com/showthread.php?t=1945

EJayCe996 · 04-24-2008, 10:17 PM

Nah, Juiceh just happens to have a near identical setup to RX-Heaven

Juice · 04-24-2008, 10:44 PM

Quote:

Originally Posted by MaczPayne

^Trying to preserve the rarity aren't we?

Quote:

Originally Posted by phoenix7

aja! Is that why the pics were removed? Those were of HIS car??

Nah, I don't care if people use my pics. If I did I wouldn't post them in my thread. I didn't even get to see what that missing pic was.

04-19-2008, 05:22 PM	#1
Boostmaniac Rotary Fanatic Join Date: Apr 2008 Posts: 182 Rep Power: 0	Somewhat custom hood. Is there any way a hood could be made that resembled a stock TII hood but had a NACA duct to vent air to the turbo? I want something like this but just cringe at the idea of cutting up my aluminum hood. Thanks for the help guys! -Maniac

04-20-2008, 12:40 AM	#2
JKL Racing Engineering Rotary Fanatic Join Date: Feb 2008 Posts: 176 Rep Power: 18	Yes, we can certainly do any part under two options: 1. We can custom produce the hood and duct for your specification but it will be very expensive. 2. We will need at least 15 people interested in this product then we can get a GB going. __________________ Check out our grand opening Online Store for more exclusive products for your rotary! Please contact us via sales@jklre.com We accept direct Credit Card payments!!! No refunds on GB deposits or purchases!

04-22-2008, 06:58 PM	#7
JKL Racing Engineering Rotary Fanatic Join Date: Feb 2008 Posts: 176 Rep Power: 18	we would like to see it happen also but it totally depends on the amount of interests we get from the customers so you guys are in control here. __________________ Check out our grand opening Online Store for more exclusive products for your rotary! Please contact us via sales@jklre.com We accept direct Credit Card payments!!! No refunds on GB deposits or purchases!

04-24-2008, 09:39 PM	#12
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	^Trying to preserve the rarity aren't we? __________________ Johnson TA FC in the works!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-21-2008, 07:47 AM	#3
Boostmaniac Rotary Fanatic Join Date: Apr 2008 Posts: 182 Rep Power: 0	How expensive is very expensive, ballpark figure.

04-23-2008, 10:12 AM	#8
Iox106 The Newbie Join Date: Mar 2008 Posts: 19 Rep Power: 0	What would be the cost of the panspeed hood if we do have the inter?

04-23-2008, 03:54 PM	#9
Boostmaniac Rotary Fanatic Join Date: Apr 2008 Posts: 182 Rep Power: 0	Can someone link a pic of the Panspeed hood? It might already have what I am thinking about.

04-24-2008, 10:17 PM	#14
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX Posts: 283 Rep Power: 18	Nah, Juiceh just happens to have a near identical setup to RX-Heaven