Car 345, rx7 rally car.

[Whizbang]

Fitted the studs for the pump plate, mounted the fuel filter, and start to size the -6AN lines in for the fuel array. Summit (Russell) brand hoses are living nightmare to assemble and I will only buy Earls (Jegs) next time. Going to mark and measure and pay a place in town to deal with assembling those things.

Also, most of the brakes lines are done. need a Master Cylinder to bias line, and a line to go to the axle that is flexible.

Also I mounted the foot switch for the horn on the co-driver foot rest. A similar switch will go on the other side for wipers/sprayer activation.